Grimor

Ok. I'll try to compile and test it tomorrow. If i understand, i must join both grounds (arduino and marantz) together and then pin 1 of the marantz (trigger) to the arduino PWM pin 10, and it will test different voltage values every second for me. Is this right? Thank you for your support and sorry to the comunity for this "offtopic"

3 of then

@BTM_Pix Now the same button make different actions with same wiring just with diferent resistor values!! You rock! Many tries/error left tonight. Hope someone own the original remote and can take a picture fron inside, things will be a lot of easier.

I tried all kind of combination but only with one button. It seen that RC600 has 3 buttons. My led color sign was OK (green for standby, red for recording even peaks blink in orange) But i miss resistor and other 2 buttons. My electronic skill level is: Beginner

4 pole 3.5mm, as original one. I keep a photo of my prototipe where pin 1 was inner pin and pin 4 (GND) was the outsider pin of the 3.5mm connector.

Another PMD-661 here! In fact, i managed to make a DIY wired remote, with just a RGB led, a 3,5mm stereo plug and a mini swich, just like original marantz one. But mine starts the record but only can pause the same track and put marks, can't stop the record and dont know why...

Working ok with no issues at the moment. Really helpfull for match color style of different lumix cameras and fine tunning on the field. Now that you have all my phone contacts, don't forget to call my mom and say her i will be on her house to lunch next saturday... Thanks a lot, you are great!!!

Oh man, Thats a real Quick app!! Thanks!!!

BTM, first of all, thank you for this and congratulation again. I play with the program a little, but i can't take the point to the combination test. (Stepper method) I think it will be more usefull (to me) just simple slider for each value (contrast, sharpness, NR, saturation) and play with them with a hdmi external monitor to see the changes in real time. (Without going to the camera menus, loosing the image-reference). Something like Panasonic Profile Slider App. If the slider say the number of value that is sending to the camera, will be the best way to found the "golden combination" in the field. But anyways really great job, consider a donation page or similar because your work worth it.

Does the Adobe Premiere new update have a "color match" new tool?

100% agree with those point. Will ad "camera movement" as key point too. Simple slider/crane shoots and people around you will say "woah!!, looks like a film!!"

Seens like any kind of little nut inside is loosing slowly. Did you try to screw this piece while pulling from it?

Well, probably Tito Ferradans, Zack Forsman or any other with similar setup can give you a good advice. I have the "poor man" version of yours, aka Lumix+kowa 16H+slr magic rangefinder and found helios 44-2 and konica hexanon 40mm 1.8 very sharp with no vigneting.

I think there's no universal answer. Sensor+taking+anamorphic is a whole combo. So, say the camera and anamorphic you are using and probably get accurate answer. As example, my optex 1.33x works best with modern 14-42 kit lens and my Kowa 16H work best with old Fds and russian primes.

And now, he is probably more confused than before

Olé!!!

How is the "focus over wifi" protocol? I know we can focus touching the device's screen with imgapp, but can we send focus point or rack focus with your device? Will be great feature for gimbal users.

Really hard porn there... 50 Shades of BTM !!!

Carte D'or Rum&Raisin!

Welcome back, master!!! Hope everything was OK and nice to see you again !!!

Sorry, but it makes no sense to me. When you put a piece of foam and put the plate screw really tight (because you dont want to loose your camera) it does'nt affect the image. Vibrations will be almost the same. Only a 4th axis device will do the trick when stairs /runnig , etc)

https://artlist.io Never used it, but they said only 199/year for unlimited high quality songs and whatever you do with. Includes license for films/tv/adds/games/apps...

With MKE600 and Lumix G80 i need to use a impedance transformer cable (Hosa MIT-156) designed to "match 600R output impedance to 2.5K imput impedance". Don't know if it will work for you, but it solved my mic-mic impedance mismatch problem.