A collection of suggestions (NOT only from me) from a dead thread on dpr: - different noise reduction settings for all ISO sensitivities, for JPG and video. - the possibility to completely deactivate the (re-) focus function of the shutter button in every mode. - to move the focusing aid field across the frame in conjunction with adapted manual lenses. - to switch off the rear screen whilst remote controlled. - level aid and histogram displayed at the same time - a copyright info preset for the image files - 12 bit / 14 bit selectable for all modes - bracketing order selectable: 0,+,- ; -,0,+ ; +,0,- ; +,-,0 etc... - timer in conjunction with bracketing - slower fps selectable for burst (6,4) - different levels of raw compression (lossless, lossy) - selectable minimum ISO - rectangular multi af area (not just square) - level setting for zebra stripes (add a setting for 65-70 ire) - allow real time live view during burst shooting and don't display slideshow of captured images instead - allow for decoupling of the two displays (evf and rear display) so that when using evf for live view the rear display can be used, e.g., to review images or else - Eye detect focus - a backup for the settings before the firmware is updated. - focus area movable when using manual lenses (for magnification) - longer exposure time than 30s in every mode - option of cropped 4k (instead of full readout) to reduce rs and increase dof - option of lower resolution RAW files, Eg 16mp - it would be nice if Samsung could implement a x1/5 speed mode for 1080p 24Hz. - 240fps burst video for 1080 - AUTO mode should not be restricred to JPEG - In manual focus mode I could set the rotation sensitivity and direction for each lens - In focus aid mode I could set the manification rate at a 1-10x scale. Magnification should not happen in the centre of the frame, but I could set the centre of magnification anywhere on the frame - colour of Focus peeking should not be limited to 3, but I could pick a coluour from a matrix by a touch.There should be an auto mode to focus peeking that analyses the colours and offers a high contrast colour automatically - when playing back pictures that were taken by AUTO WB or by Manual WB, I would like to see the actual WB Kelvin figure of that picture - bigger resolution on the remote screen. - Ability to claibrate the display colours on the back screen (colour taken is correct when viewed at a calibrated monitor, but incorrectly appears on the back screen - ceratin pink-purples, aquamarine green-blues)