DBounce Posted December 15, 2015 Share Posted December 15, 2015 Recently got my NX1 for a bargain price.The 120fps mode is actually pretty good and can be edited flawlessly with any other Canon DSLR footage. What are your settings for this look? Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted December 15, 2015 Share Posted December 15, 2015 I also like the colors very much (and cool car, btw)!!! Quote Link to comment Share on other sites More sharing options...
ricardo_sousa11 Posted December 15, 2015 Share Posted December 15, 2015 Heres some new ones of a wedding im editting right now, theres still some stuff to fix on the curve, reduce the sharpness and will probably add some grain, but here it is :Let me know what you guys think ! kidzrevil, Pavel Mašek, Phil A and 1 other 4 Quote Link to comment Share on other sites More sharing options...
The Chris Posted December 15, 2015 Share Posted December 15, 2015 ^^^ those framegrabs look really good, nice job Quote Link to comment Share on other sites More sharing options...
Antonis Posted December 15, 2015 Share Posted December 15, 2015 Looking good Ricardo! What are your settings for this look?I also like the colors very much (and cool car, btw)!!!I used the Kodak 2393 lut from the Osiris lut pack on an adjustment layer, set at 50% opacity.Camera settings were pretty basic. Gamma control was on "normal" with luminance levels at 0-255 . Quote Link to comment Share on other sites More sharing options...
Brad Bjornstad Posted December 15, 2015 Share Posted December 15, 2015 That is some good looking stuff right there ^^Also, what were your settings, Ricardo? Quote Link to comment Share on other sites More sharing options...
ricardo_sousa11 Posted December 16, 2015 Share Posted December 16, 2015 hey, glad everyone liked it Ill share my camera settings as well as grading settings and Lut when I get home from work =) Pavel Mašek and Brad Bjornstad 2 Quote Link to comment Share on other sites More sharing options...
Brad Bjornstad Posted December 16, 2015 Share Posted December 16, 2015 hey, glad everyone liked it Ill share my camera settings as well as grading settings and Lut when I get home from work =)Thank you, sir! Greatly appreciated Quote Link to comment Share on other sites More sharing options...
ricardo_sousa11 Posted December 16, 2015 Share Posted December 16, 2015 Heres my settings for the camera on these shots :Saturation -2 // Sharpness - 10 // Contrast - 3 // Master black level 8 // 16-235 // For these frames I used the Canon 50mm f1.8 and Samyang 24mm f1.4.As for the grading, I used no input lut, just the Sunderland (deluts) Lut at 100% // Fade 44 and Sharpen at 18,5 (though I will decrease this) !As for the curves go, heres an image of how it looks, notice I also lowered a bit of saturation on the yellows and reds :Heres a few more shots with this grading :Some of these will require noise reduction, some are shot at 1080p others at 4k, and I will probably tweak further.I find this grading very versatile, it fits mosty of my shots with little to no tweaking, outside, inside, church with those terrible lights and all that.Hope you guys like it Phil A, Liam, Geoff CB and 5 others 8 Quote Link to comment Share on other sites More sharing options...
Brad Bjornstad Posted December 16, 2015 Share Posted December 16, 2015 Heres my settings for the camera on these shots :Saturation -2 // Sharpness - 10 // Contrast - 3 // Master black level 8 // 16-235 // For these frames I used the Canon 50mm f1.8 and Samyang 24mm f1.4.As for the grading, I used no input lut, just the Sunderland (deluts) Lut at 100% // Fade 44 and Sharpen at 18,5 (though I will decrease this) !As for the curves go, heres an image of how it looks, notice I also lowered a bit of saturation on the yellows and reds : Heres a few more shots with this grading : Some of these will require noise reduction, some are shot at 1080p others at 4k, and I will probably tweak further.I find this grading very versatile, it fits mosty of my shots with little to no tweaking, outside, inside, church with those terrible lights and all that.Hope you guys like it This looks absolutely PHENOMENAL. Wow. You did an awesome job here. Thank you so much for sharing. This might very well be my favorite look of all the NX1 posts I have seen yet. Amazing stuff! Did you use Gamma DR or Normal Gamma in camera? Pavel Mašek and ricardo_sousa11 2 Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted December 16, 2015 Share Posted December 16, 2015 Heres my settings for the camera on these shots :Saturation -2 // Sharpness - 10 // Contrast - 3 // Master black level 8 // 16-235 // For these frames I used the Canon 50mm f1.8 and Samyang 24mm f1.4.As for the grading, I used no input lut, just the Sunderland (deluts) Lut at 100% // Fade 44 and Sharpen at 18,5 (though I will decrease this) !As for the curves go, heres an image of how it looks, notice I also lowered a bit of saturation on the yellows and reds :Heres a few more shots with this grading :Some of these will require noise reduction, some are shot at 1080p others at 4k, and I will probably tweak further.I find this grading very versatile, it fits mosty of my shots with little to no tweaking, outside, inside, church with those terrible lights and all that.Hope you guys like it simply STUNNING. ricardo_sousa11 1 Quote Link to comment Share on other sites More sharing options...
mercer Posted December 17, 2015 Share Posted December 17, 2015 Heres my settings for the camera on these shots :Saturation -2 // Sharpness - 10 // Contrast - 3 // Master black level 8 // 16-235 // For these frames I used the Canon 50mm f1.8 and Samyang 24mm f1.4.As for the grading, I used no input lut, just the Sunderland (deluts) Lut at 100% // Fade 44 and Sharpen at 18,5 (though I will decrease this) !As for the curves go, heres an image of how it looks, notice I also lowered a bit of saturation on the yellows and reds :Heres a few more shots with this grading :Some of these will require noise reduction, some are shot at 1080p others at 4k, and I will probably tweak further.I find this grading very versatile, it fits mosty of my shots with little to no tweaking, outside, inside, church with those terrible lights and all that.Hope you guys like it Yeah Ricardo, those look beautiful. Really, really good stuff there. Did you use the Custom picture profile? And are you still underexposing? ricardo_sousa11 1 Quote Link to comment Share on other sites More sharing options...
ricardo_sousa11 Posted December 17, 2015 Share Posted December 17, 2015 Wow such great response I too was impressed, this is my fav grading so far, its quite filmic, with enough punch, it looks quite good when playing !I used Gamma DR with the settings above. I do underexpose, not by a lot, but just enough to save all the highlights without having any clipping. I dont look at the metering, I just set my exposure by eye, so I dont know if I do by 1 stop or 2 stops, just make sure you're not clipping those highlights. neosushi and Pavel Mašek 2 Quote Link to comment Share on other sites More sharing options...
rimpamposh Posted December 17, 2015 Share Posted December 17, 2015 Hello. I registered here since i finally have a camera that might be able to do decent video (nx500). So this is a very interesting topic for me.Nice work ricardo_sousa, some of the best stuff I've seen on nx1 if not the best (still the blacks are maybe a tad too washed). Are the deluts coming in rec709 version as well, I thought they come only for log?From what I've seen the nx1 has a problem of oversharpening. They should have included a 0 sharpening option. If you downscale properly from 6.5k it's not good to add sharpening. Adding any to a perfectly detailed image will only have downsides with no benefit (and it will show up really fast).But I think this can be solved if downscaling to 1080. Bicubic is a very versatile scaler since it has 2 tweakable parameters (you will get exactly how sharp or soft you need it to be). I strongly suggest people to try it (http://avisynth.nl/index.php/Resize#BicubicResize). Another idea if you want to keep 4k would be to upscale with something like nnedi (almost no added ringing when upscaling) and than custom bicubic back, the results should be very different than adding blur. Quote Link to comment Share on other sites More sharing options...
neosushi Posted December 17, 2015 Share Posted December 17, 2015 Totally agree with underexposing the NX1 : ) Just watch out for your skintones if you underexpose too much - the dynamic is not huge so sometimes you might not want to trade the hightlights for the skin tone...On my GH4 I used to do the opposite ! Overexpose to avoid that stupid noise everywhere ! Quote Link to comment Share on other sites More sharing options...
Phil A Posted December 17, 2015 Share Posted December 17, 2015 I don't wan to hijack the topic, but regarding the exposure I've read that both the NX1 and GH4 are best used up to ISO800 and only up to 1600 if necessary. But if you have to ETTR the GH4 while you underexpose the NX1, wouldn't that in fact give the NX1 the low light advantage? If you have the same lens parameters regarding f-stop and shutter speed, ETTR-ing one by 1 stop while underexposing the other by 1 stop would give you 2 stops lower ISO on the NX1. Am I doing the math wrong in my head?The screengrabs of Ricardo are mindblowing. Beautiful stylistic grade. ricardo_sousa11 1 Quote Link to comment Share on other sites More sharing options...
rimpamposh Posted December 17, 2015 Share Posted December 17, 2015 Well, it would be lower ISO, but not same brightness. You would still need to midtone/shadow expose the nx1 after by 1 stop or more and lower the GH4 overall.Now, if the shadows in nx1 would hold well to this afterexposing, that should give the nx1 a dynamic range advantage. Not sure that can be counted on, but with some denoise/regrain, you can achieve a pleasing image still. Quote Link to comment Share on other sites More sharing options...
mercer Posted December 17, 2015 Share Posted December 17, 2015 I don't wan to hijack the topic, but regarding the exposure I've read that both the NX1 and GH4 are best used up to ISO800 and only up to 1600 if necessary. But if you have to ETTR the GH4 while you underexpose the NX1, wouldn't that in fact give the NX1 the low light advantage? If you have the same lens parameters regarding f-stop and shutter speed, ETTR-ing one by 1 stop while underexposing the other by 1 stop would give you 2 stops lower ISO on the NX1. Am I doing the math wrong in my head?The screengrabs of Ricardo are mindblowing. Beautiful stylistic grade.I am actually glad this came up because I just started experimenting with ETTR and since different cameras have different ways in which their exposure guides work, it can be a little confusing. Isn't it just Exposing To The Right (obviously) just below clipping, by using zebras or the histogram as your guide? If I am correct, then that's what Riccardo said he was doing. Quote Link to comment Share on other sites More sharing options...
ricardo_sousa11 Posted December 17, 2015 Share Posted December 17, 2015 Heres some before and after, so you can understand how i've been exposing. These were with the grade on top, without further tweak, ill reduce the yellow/orange sat. and correct the color balance.On both, I pulled either the exposure or the shadows up a bit. (this ballroom reminded me of titanic !)As you can see, they're just slightly underexposed to avoid the clipping. Liam, TheRenaissanceMan, Pavel Mašek and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted December 17, 2015 Share Posted December 17, 2015 man, such a huge different from post! I'd like to be such a good colorist as you seem to be! p.s.: yours is, for sure, a pro quality video coming out from NX1. Brad Bjornstad 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.