Paniko Posted December 3, 2015 Share Posted December 3, 2015 Yep. The E-M1 is indeed a creative tool Cinegain and Nikkor 2 Quote Link to comment Share on other sites More sharing options...
elteesang Posted December 4, 2015 Share Posted December 4, 2015 I'm debating on getting an EM5 MK II or EM1. Is there really a bump in video image quality on the EM5 MK II with the new firmware? I really would prefer the EM5 for the form factor but if the EM1 is still better quality in video I will still end up getting that instead. Quote Link to comment Share on other sites More sharing options...
Administrators Andrew Reid Posted December 4, 2015 Author Administrators Share Posted December 4, 2015 Um...did you forget Blackmagic?In that case I forgot Arri Raw, Red Raw and a lot of other cinema cameras too.I was of course talking about DSLRs!!Little know fact... EOSHD is a blog about DSLR and mirrorless cameras Ed_David 1 Quote Link to comment Share on other sites More sharing options...
Administrators Andrew Reid Posted December 4, 2015 Author Administrators Share Posted December 4, 2015 Went and got the E-M5 II with version 1.0 firmware instead, will try shooting a test scene in V1 then upgrade to V2 and see what the difference is. Jimbo, Paniko and RobD 3 Quote Link to comment Share on other sites More sharing options...
Ed_David Posted December 4, 2015 Share Posted December 4, 2015 also they just released a firmware update from v2 to 2.1 - I'm going to download today Quote Link to comment Share on other sites More sharing options...
Hene1 Posted December 4, 2015 Share Posted December 4, 2015 In that case I forgot Arri Raw, Red Raw and a lot of other cinema cameras too.I was of course talking about DSLRs!!Little know fact... EOSHD is a blog about DSLR and mirrorless camerasStill you mentioned Blackmagic as a way to get 10bit internal ProRes.https://www.youtube.com/watch?v=i38w-FgnNL0 Quote Link to comment Share on other sites More sharing options...
Administrators Andrew Reid Posted December 4, 2015 Author Administrators Share Posted December 4, 2015 Who gives a toss?---Ed - I am on V1.0 now. Seems to focus better with the Metabones Speed Booster & EF lenses so a bit afraid to update Quote Link to comment Share on other sites More sharing options...
visigoth Posted December 4, 2015 Share Posted December 4, 2015 Very useful review. One question, however -- perhaps I'm being thick, but I can't untangle this bit: "What Olympus have got resoundingly spot on especially with the E-M5 II is the stills side. There’s a caveat though. The AF performance is extremely lens dependent, varying rather erratically. Sadly on the E-M5 II it is just too inaccurate to be fully usable at the moment… On the E-M1 and GH4 this doesn’t seem to be as much of an issue."It would seem that you're saying that they haven't got it spot on with the E-M5 II, but have with the E-M1. Or am I missing something?(This would be useful for me to know, as I have an E-M1, but have not tried Canon lenses with it. Should I?) Quote Link to comment Share on other sites More sharing options...
Administrators Andrew Reid Posted December 5, 2015 Author Administrators Share Posted December 5, 2015 I am talking about lens AF with the Metabones adapter, which isn't an Olympus responsibility. Quote Link to comment Share on other sites More sharing options...
visigoth Posted December 5, 2015 Share Posted December 5, 2015 Ah right. That makes sense. Something to be aware of, btw -- not sure whether you've ever covered it here? -- is that Metabones has just added PDAF support for the E-M1 in a firmware update. This *should* make Canon EF lenses focus as well as Oly's own Four Thirds glass, when shooting stills. It doesn't work with video, unfortunately:http://www.metabones.com/article/of/firmware_update_version_1.8 Quote Link to comment Share on other sites More sharing options...
elteesang Posted December 12, 2015 Share Posted December 12, 2015 Went and got the E-M5 II with version 1.0 firmware instead, will try shooting a test scene in V1 then upgrade to V2 and see what the difference is.Hi Andrew any updates on this? Quote Link to comment Share on other sites More sharing options...
Marcio Kabke Pinheiro Posted December 14, 2015 Share Posted December 14, 2015 Waiting for the comparison between V1 and V2 too.And anyone knows some links / tutorials about how to grade flat profiles (not Log profiles) like this new one on the E-M5 II? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
Tida Posted December 22, 2015 Share Posted December 22, 2015 Instead of new Movie Flat Picture Mode, has somebody already tested Art 3 Filter – Pale & Light Colour. You can stop it approx. 1.5 times down (preferred first by ISO to get less noise) and would end up with really flat profile.But in general I don't understand all the discussion about flat profiles especially when it comes to 8-bit cameras. Isn't it better at first to check RGB-Histograms whether scene would fit within boundaries by means of normal profile. I have seen so many examples where people tested Log profiles on low dynamic range scenes and wondered that after post production they achieved no better or worse results. In my opinion only if my scene has a dynamic range where I would have to crash too much, I should switch to flat profiles where I hopefully end up close to the boundaries (RGB 0-255 for 8 bit) again. For 10-bit I could sacrifice more space to the upper and lower boundaries as calculation within color grading software would end up more precise that nothing falls apart when it finally goes back to the 8 bit monitor.For me, Olympus flat profile is more or less of a compromise where you don't have to choose between normal and log but at least achieve something better in DR. Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted December 27, 2015 Share Posted December 27, 2015 The spread of strengths across the camera industry is driving me a bit nuts.Only Blackmagic do cheap affordable int. 10bit ProRes.Only Olympus do effective stabilisation.Only Panasonic do cheap 4K in Micro Four Thirds camOnly Fuji do a film-inspired shooting experience (although Olympus run them close)Only Sony max out the specs and do a full frame mirrorless cameraOnly Samsung do a really responsive fast ergonomic DSLR-style mirrorless cameraOnly Canon... I mean only Magic Lantern do raw video. The A7S II is closest to the perfect camera but the handling is just...so soulless.Currently I am thinking of keeping hold of the E-M5 II as a stills camera, second to the NX1 and A7S II as my main video cameras.smart move ! Thinking about getting a fuji xt1 or olympus em1 for stills and the nx1 for video. Im really just after the APS-H look for stills and the occasional video Quote Link to comment Share on other sites More sharing options...
norlandwind Posted March 22, 2020 Share Posted March 22, 2020 You wrote: "Both have timecode over HDMI and uncompressed HDMI. No big deal in 2015 and the HDMI doesn’t really do anything for image quality." Really both, the OMD E-M1 and the OMD E_M5 MkII? I can get no output over the HDMI port with my M1 in the recording mode. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.