Geoff CB Posted April 16, 2016 Share Posted April 16, 2016 4 hours ago, Otto K said: So, a small poll - do you want me to make an installer that will install mods to the camera internally in order to work faster? YES. I share my SD cards across camera types and would love it tied to camera instead of card. Great work Otto. Quote Link to comment Share on other sites More sharing options...
MonGe El GenioMusical Posted April 16, 2016 Share Posted April 16, 2016 i'll vote for internal... Quote Link to comment Share on other sites More sharing options...
Georg P. Mueller Posted April 16, 2016 Share Posted April 16, 2016 absolutely - set and forget... Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted April 16, 2016 Share Posted April 16, 2016 Same for me. As long as it's easily reversible and works faster, count me in. Quote Link to comment Share on other sites More sharing options...
Pavel Mašek Posted April 16, 2016 Share Posted April 16, 2016 15 hours ago, vasile said: If I could find where it is set in di-camera-app I'd be in business. I really hope you find the way! 8 hours ago, Otto K said: So, a small poll - do you want me to make an installer that will install mods to the camera internally in order to work faster? I vote for internal too (even it will mean set bitrate according slowest card I have). Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted April 16, 2016 Author Share Posted April 16, 2016 @Otto K +1 for internal Quote Link to comment Share on other sites More sharing options...
neosushi Posted April 16, 2016 Share Posted April 16, 2016 +1 internal Also what are the chances we could get 14bits raw recording on the NX1 ?? Quote Link to comment Share on other sites More sharing options...
Otto K Posted April 16, 2016 Share Posted April 16, 2016 @neosushi no chances at all, even stills mode 15fps are 12 bit images. Quote Link to comment Share on other sites More sharing options...
neosushi Posted April 16, 2016 Share Posted April 16, 2016 @Otto K thanks for your reply how about 1080p raw ? Quote Link to comment Share on other sites More sharing options...
AaronL Posted April 16, 2016 Share Posted April 16, 2016 56 minutes ago, Otto K said: @neosushi no chances at all, even stills mode 15fps are 12 bit images. do you think it could be possible to get 24fps at 12bit? also, +1 for internal Quote Link to comment Share on other sites More sharing options...
Otto K Posted April 16, 2016 Share Posted April 16, 2016 I honestly doubt it. I think even mjpeg 4k would be huge improvement, but Vasile is more oriented towards video hacks, I'm more on basic and low level functionality as well as stills. saintsimon2016 and Marco Tecno 2 Quote Link to comment Share on other sites More sharing options...
undecided Posted April 16, 2016 Share Posted April 16, 2016 Internal would be great.....Thx Quote Link to comment Share on other sites More sharing options...
samuel.cabral Posted April 16, 2016 Share Posted April 16, 2016 +1 to internal! Quote Link to comment Share on other sites More sharing options...
SMGJohn Posted April 17, 2016 Share Posted April 17, 2016 On 15.4.2016 at 3:39 PM, Syme said: Not impossible. Unlikely, but not impossible. It could be built into the HEVC encoder, for instance. I can confirm that after testing the newest x265 and even the HEVC that comes with Premiere Pro CC 2015, the HEVC still smooths out details and it does it even at high bitrates. I tested several special videos I made with various grains like film grain and ISO grain including various gradients, the fine grain details becomes mosquito noise when there is a huge amount of it, when there is little noise/grain it simply smooths it out which makes me believe there is a built in noise reduction in HEVC which I cannot find in the codec settings I use Hybrid Video Converter which is a very complex GUI for video codecs and no such settings exist and therefore its uncontrollable I also tried various block sizes but had little effects on the noise details. Grain setting seem to improve upon this a little but its non existent in Adobe Premiere and the Grain setting is pretty much unique to x265 at this moment. I can post results here if anyone is interested otherwise I wont bother, I can upload the various HEVC files, they are not very large. Funny enough I compressed a 2GB prores file to like a 7mb HEVC with acceptable detail loss. It seems 720p HEVC do just fine with bitrates all the way down to 500kbps but I recommend 750kbps or 800~ 1080p seems to do fine with 1000kbps but 1500kbps is recommended, avoid HEVC if you want fine details because it really smears them out even at 100mbps. Also the Adobe HEVC is God awful, I would say its almost on pare with DivX's HEVC codec and that one is just plain shit, if anyone has dealt with DivX files in the past they used to be extremely popular on the internet back in the days like 6 - 8 years ago, you will know what I am talking about... Quote Link to comment Share on other sites More sharing options...
/Chop N Shoot Films/ Posted April 17, 2016 Share Posted April 17, 2016 This is depressing. sandro and kidzrevil 2 Quote Link to comment Share on other sites More sharing options...
vasile Posted April 17, 2016 Share Posted April 17, 2016 Mod update for NX500 users here: http://***URL removed***/forums/post/57619677 NX1 users can stay on v2.0, no change - yet ;-) - for them. Enjoy... SMGJohn, Beritar, Marco Tecno and 4 others 7 Quote Link to comment Share on other sites More sharing options...
vaga Posted April 17, 2016 Share Posted April 17, 2016 @Vasile to make sure I understand v2.0 and 3.0 correctly, now you set bitrates you want for Pro and HQ? So for example, if I use Otto's new script hack version, I can set Pro to say 150Mbps and HQ to 100Mbps so if I have a fast card I can use Pro or if I have a slower card I can use HQ? Quote Link to comment Share on other sites More sharing options...
vasile Posted April 17, 2016 Share Posted April 17, 2016 1 hour ago, vaga said: @Vasile to make sure I understand v2.0 and 3.0 correctly, now you set bitrates you want for Pro and HQ? So for example, if I use Otto's new script hack version, I can set Pro to say 150Mbps and HQ to 100Mbps so if I have a fast card I can use Pro or if I have a slower card I can use HQ? That is one possibility. The options are there, how you use them depends on what your needs are. Quote Link to comment Share on other sites More sharing options...
Pavel Mašek Posted April 17, 2016 Share Posted April 17, 2016 On 15. 4. 2016 at 5:44 PM, vasile said: I like more the nrmenable st cap live parameter from here: https://github.com/ottokiksmaler/nx500_nx1_modding/blob/master/ST%20Commands.md If I could find where it is set in di-camera-app I'd be in business. I think MJPEG is without noise reduction - could it help to find where it is set? Marco Tecno and SMGJohn 2 Quote Link to comment Share on other sites More sharing options...
Otto K Posted April 17, 2016 Share Posted April 17, 2016 It's hard to tell, the resolution is so low (~1%) that noise would be averaged anyway. Then again it probably has a different path in camera... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.