cisco150 Posted June 17, 2016 Share Posted June 17, 2016 5 hours ago, vasile said: nx-patch v5.1 rgds Thanks again Vasile and Otto for the great work enjoying my Nx1 lucabutera and kidzrevil 2 Quote Link to comment Share on other sites More sharing options...
classicam Posted June 17, 2016 Share Posted June 17, 2016 Hi Vasile, Thank you so much for the wonderful work! I've just installed your no-wakeup mod and 5.1 patch. It all work flowlessly! I have two question wish you can help me to understand: 1. What is the stable highest bit rate for UHD 25p/30p and FHD 120p that you recommend? I'm using the lexar 2000x 64G card. 2. Is that a way to make focus mode stay in Manual mode by default? (or with a possible futuremod) It's very annoying to have the mode swithed in auto by default when I'm using Samsung lens e.g the 30mm and 16mm lenses which don't have a MF switch:( Your input will be much appreciated!! Thanks again! Quote Link to comment Share on other sites More sharing options...
vasile Posted June 17, 2016 Share Posted June 17, 2016 41 minutes ago, classicam said: Hi Vasile, Thank you so much for the wonderful work! I've just installed your no-wakeup mod and 5.1 patch. It all work flowlessly! I have two question wish you can help me to understand: 1. What is the stable highest bit rate for UHD 25p/30p and FHD 120p that you recommend? I'm using the lexar 2000x 64G card. 2. Is that a way to make focus mode stay in Manual mode by default? (or with a possible futuremod) It's very annoying to have the mode swithed in auto by default when I'm using Samsung lens e.g the 30mm and 16mm lenses which don't have a MF switch:( Your input will be much appreciated!! Thanks again! 1. no idea, you should experiment with your card 2. this will require deep interference with di-camera-app. Basically I would need to zombify di-camera-app and make it play my tune. Possible and I am working towards that because I would like to achieve a better BBAF which requires the same type of interference. But definitely not short term and may not even be achievable. NB. This is not a promise and you did not see any time frame above, did you? Marco Tecno 1 Quote Link to comment Share on other sites More sharing options...
classicam Posted June 18, 2016 Share Posted June 18, 2016 11 hours ago, vasile said: 1. no idea, you should experiment with your card 2. this will require deep interference with di-camera-app. Basically I would need to zombify di-camera-app and make it play my tune. Possible and I am working towards that because I would like to achieve a better BBAF which requires the same type of interference. But definitely not short term and may not even be achievable. NB. This is not a promise and you did not see any time frame above, did you? Thanks for the input. You work is greatly appreciated! Quote Link to comment Share on other sites More sharing options...
vasile Posted June 18, 2016 Share Posted June 18, 2016 this. Run out of slots to enable. Any NX500 beta testing volunteers please PM me. iamoui and lucabutera 2 Quote Link to comment Share on other sites More sharing options...
vaga Posted June 18, 2016 Share Posted June 18, 2016 @vasile how is the progress on integrating things into Samsung's menu itself? Quote Link to comment Share on other sites More sharing options...
vasile Posted June 18, 2016 Share Posted June 18, 2016 41 minutes ago, vaga said: @vasile how is the progress on integrating things into Samsung's menu itself? Short answer: no progress. This will take a long time and I am trying to do things with a lot more impact first. You should check this from time to time - I keep it up to date, and you will save some time by just checking it. rgds RieGo 1 Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted June 18, 2016 Author Share Posted June 18, 2016 2 hours ago, vasile said: Short answer: no progress. This will take a long time and I am trying to do things with a lot more impact first. You should check this from time to time - I keep it up to date, and you will save some time by just checking it. rgds thanks for this Vasile ! Quote Link to comment Share on other sites More sharing options...
Herb Posted June 19, 2016 Share Posted June 19, 2016 Looking at the gear for sale forum, there are a few NX1s for sale. Is it time to move on? Quote Link to comment Share on other sites More sharing options...
Liam Posted June 19, 2016 Share Posted June 19, 2016 25 minutes ago, Herb said: Looking at the gear for sale forum, there are a few NX1s for sale. Is it time to move on? No, start buying them! All of them! vaga and Marco Tecno 2 Quote Link to comment Share on other sites More sharing options...
Herb Posted June 19, 2016 Share Posted June 19, 2016 1 hour ago, Liam said: No, start buying them! All of them! Ha! Where's the link to the one you're selling? Quote Link to comment Share on other sites More sharing options...
Liam Posted June 19, 2016 Share Posted June 19, 2016 38 minutes ago, Herb said: Ha! Where's the link to the one you're selling? Don't wanna give away what my other account is but he's selling it for a VERY good deal.. Quote Link to comment Share on other sites More sharing options...
Herb Posted June 19, 2016 Share Posted June 19, 2016 Feel like everybody is abandoning ship. Quote Link to comment Share on other sites More sharing options...
NX1user Posted June 19, 2016 Share Posted June 19, 2016 31 minutes ago, Herb said: Feel like everybody is abandoning ship. I'm experiencing the opposite. People that are seeing what my NX1 can do (especially after the bitrate hack) are now seeking them out but can't find them. Marco Tecno, Pavel Mašek and vaga 3 Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted June 19, 2016 Share Posted June 19, 2016 Actually I'm looking for a sub 750€ (new) nx1 body or sub 550€ (used but perfect) and can't find one for those prices. Same for nx500 with {400;250} figures. vaga 1 Quote Link to comment Share on other sites More sharing options...
DPStewart Posted June 20, 2016 Share Posted June 20, 2016 Hey folks, I've lost my bookmarks - what's the link for Vasile's latest version of the high bit-rate hack for the NX1 for firmware 1.40? Or has that been abandoned in favor of the firmware 1.41 update. Last I checked in it still wasn't allowing the higher bit-rate hacks. What's our latest and greatest for specifically high bit-rates? THANKS! Quote Link to comment Share on other sites More sharing options...
Pavel Mašek Posted June 20, 2016 Share Posted June 20, 2016 On 16. 6. 2016 at 0:20 AM, vasile said: nx-patch v5.1 rgds I have installed version 5.2 on my NX1. Thank you very much Vasile! There are now slots for Normal bitrates so no I can use different bitrate setup for timelapse (eg. 320 Mbps), 4k30p (180), 1080p60 (150), 120fps (100-110Mbps),... Also activation of GUI via luminance button is great choice... I really do not see any downsides now! I am wondering what will come next... silent shutter on NX1 would be great ( I know it is very complicated - I saw your post to Marco od dpreview). However this already outperformed what I have ever expected from whole NX1/NX500 hacking project - custom bitrate settings for each resolution which runs without any waiting and so smooth... BIG THANKS. vaga, Marco Tecno, kidzrevil and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Pavel Mašek Posted June 20, 2016 Share Posted June 20, 2016 34 minutes ago, DPStewart said: Hey folks, I've lost my bookmarks - what's the link for Vasile's latest version of the high bit-rate hack for the NX1 for firmware 1.40? Or has that been abandoned in favor of the firmware 1.41 update. Last I checked in it still wasn't allowing the higher bit-rate hacks. What's our latest and greatest for specifically high bit-rates? THANKS! You can use Kino Seed hack or Vasile's. Vasile is mainly focus on bitrates and biggest benefit is that it is loaded instantly without any waiting and camera behaves like without hack (but you can change bitrates in camera and they will survive even cold boots if you make them defaults - can be done in GUI). bitrate patch itself https://github.com/ottokiksmaler/nx500_nx1_modding/tree/master/video-bitrate-mods/nx-patch to make it work you have to install nx-on-wake which is only complicated and (to be honest) dangerous part of whole process. https://github.com/ottokiksmaler/nx500_nx1_modding/tree/master/nx-on-wake DPStewart and kidzrevil 2 Quote Link to comment Share on other sites More sharing options...
DPStewart Posted June 20, 2016 Share Posted June 20, 2016 4 minutes ago, Pavel Mašek said: You can use Kino Seed hack or Vasile's. Vasile is mainly focus on bitrates and biggest benefit is that it is loaded instantly without any waiting and camera behaves like without hack (but you can change bitrates in camera and they will survive even cold boots if you make them defaults - can be done in GUI). bitrate patch itself https://github.com/ottokiksmaler/nx500_nx1_modding/tree/master/video-bitrate-mods/nx-patch to make it work you have to install nx-on-wake which is only complicated and (to be honest) dangerous part of whole process. https://github.com/ottokiksmaler/nx500_nx1_modding/tree/master/nx-on-wake Thanks mate! Quote Link to comment Share on other sites More sharing options...
Popular Post vasile Posted June 20, 2016 Popular Post Share Posted June 20, 2016 42 minutes ago, Pavel Mašek said: I have installed version 5.2 on my NX1. Thank you very much Vasile! There are now slots for Normal bitrates so no I can use different bitrate setup for timelapse (eg. 320 Mbps), 4k30p (180), 1080p60 (150), 120fps (100-110Mbps),... Also activation of GUI via luminance button is great choice... I really do not see any downsides now! I am wondering what will come next... silent shutter on NX1 would be great ( I know it is very complicated - I saw your post to Marco od dpreview). However this already outperformed what I have ever expected from whole NX1/NX500 hacking project - custom bitrate settings for each resolution which runs without any waiting and so smooth... BIG THANKS. I am now doing groundwork for mods that will be a lot more advanced. This is why you are likely to not see any visible progress for a while. In essence I am trying to zombify the di-camera-app to enable bi-directional communications between it and my mod infrastructure, and to introduce the possibility to "drive" it from the mod runtime.. If successful this should allow many things, potentially including native UI integration, true BBAF, native integration of focus stack & focus pull, etc. etc. My plan is to make it an extensible and open framework upon which others might build on (e.g. Otto) to deliver things that work in coordinated manner with the native app, and that are aware of what the native app does. This will allow, for example, to have the UI permanently up to date regardless of what the mod does (as opposed to today where mods do not update the UI because they are independent of di-camera-app). NB. Nothing above is a promise or commitment and you do not see any timeline, do you? PS. I still covet that lens ;-) SMGJohn, lucabutera, kidzrevil and 7 others 10 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.