sandro Posted July 29, 2016 Share Posted July 29, 2016 4 minutes ago, kidzrevil said: I still wanna know if @Otto K @kinoseed or @vasile can give us a constant high res EVF like it is when you switch to movie standby mode. That will make shooting stills infinitey easier with this camera Also I would like to know if anyone noticed that strange bump in light from ISO 2000 and 2500 I talked about before. Could be a sign NR ia activated. Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted July 29, 2016 Author Share Posted July 29, 2016 @sandro i'll test today ! Quote Link to comment Share on other sites More sharing options...
SMGJohn Posted July 29, 2016 Share Posted July 29, 2016 It would be a gift from God if someone could make electric contact for Nikon speedbooster so the stabiliser at least works. But I am definitely fetching that dumb adapter non the less. lucabutera and Marco Tecno 2 Quote Link to comment Share on other sites More sharing options...
ttbek Posted July 29, 2016 Share Posted July 29, 2016 ihkim's site is unfortunately not very intelligible for me through google translate. While his English isn't perfect it is way way better than google translate and he seems to have set up another site (that is linked to from his blog) where he goes through what he knows of the protocol in English: http://blueringlab.com/ Unfortunately I have no interest in a speedbooster for Nikon lenses on NX. For Canon lenses, yes, and such a design could be shared for Nikon lenses. On the other hand though, a design for Nikon lenses that uses the extra space would not then work for Canon lenses. Marco Tecno and vaga 2 Quote Link to comment Share on other sites More sharing options...
Calum MacPhail Posted July 29, 2016 Share Posted July 29, 2016 Great work on the speedbooster so far, great to see so much activity in regards to continuing what Samsung abandoned. The DIY community will be our only chance of seeing an electronic mount adapter for the NX, I cant see any companies (metabones, or even some of the newer chinese ones like Zhongyi), seeing this as an economically viable product. RockyMountains work is very interesting and I've been following his youtube channel for sometime. Without wanting to be an negative nancy, I think best case scenario we could end up with something like the earlier redrock adapters, with an external control unit. I happen to know a lot of engineers, including one that works for Thales Angenieux, I'll run the concept of a hardware adapter past them next I see them and see if I can get anyone to contribute. SMGJohn and Marco Tecno 2 Quote Link to comment Share on other sites More sharing options...
sandro Posted July 29, 2016 Share Posted July 29, 2016 Why are you guys mainly interested in electronic control (af and is) of canon lenses and not Nikon's? Quote Link to comment Share on other sites More sharing options...
Calum MacPhail Posted July 29, 2016 Share Posted July 29, 2016 29 minutes ago, sandro said: Why are you guys mainly interested in electronic control (af and is) of canon lenses and not Nikon's? Probably because there is more Canon than Nikon lenses that need electronic control and a large number of the users on this forum will be most likely ex or current Canon users. Marco Tecno 1 Quote Link to comment Share on other sites More sharing options...
CMCFirm Posted July 30, 2016 Share Posted July 30, 2016 On 4/22/2016 at 5:07 PM, CMCFirm said: How hard would it be to remove the block on the NX1 so that the Samsung Camera Manager app functions while using manual lenses? Would be great to have wireless live view while using non Samsung Glass. Thanks everyone! BTW, for anyone interested in developing, I am posting the link for accessing all NX1 firmware files again for ease of access. I usually grant access pretty quickly when a request comes in. Access the files here: https://drive.google.com/a/cmcfirm.com/folderview?id=0Bwt0uzFgEoRkQ2ZLOUJOM295UGM&usp=sharing The entire firmware history (v1.01, v1.10, v1.20, v1.21, v1.22, v1.30, v1.31, v1.32, and v1.40) for the NX1 is now archived in that link: Happy to help and really am impressed by what you all have accomplished thus far! I posted up on the Metabones page asking for smart adapter support. Feel free to follow up on my request there. Luca, fantastic work brother! Sign me up to your wait list. I want one. I am quoting myself above as a quick reference to anyone who needs access to the OEM NX1 firmware. Great job everyone! The progress is better than I could have ever imagined. Just signed up with FilmConvert today and got some tasty new NX1 profiles to work with. Loving life as an orphaned Samsung NX1 and NX500 owner right now! Marco Tecno and lucabutera 2 Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted July 30, 2016 Share Posted July 30, 2016 13 hours ago, sandro said: Why are you guys mainly interested in electronic control (af and is) of canon lenses and not Nikon's? I want intelligent adapter since: 1) no nx lens above 200mm 2) I use camera mainly for stills 3) I want af and ois I prefer canon since: 4) many friends have canon, zero have Nikon 5) I really like long canon tele lenses vaga 1 Quote Link to comment Share on other sites More sharing options...
cojocaru27 Posted July 30, 2016 Share Posted July 30, 2016 On 7/28/2016 at 11:52 PM, lucabutera said: Samsung NX1 + NXL (SB prototype) + 50mm Nikon 1.4 (f.2). I love the DOF like Full frame! I remember my old Canon 5d mark III... but 4K!! luca, what is the focal distance with your adapter for nikon 50mm 1.4D , couldn't be 50mm, isn't it? and also the dof is even more shallow, at 1.4d? i am asking as i have exactly the same lens and now the focal is around 75mm. anyways when can i register for a preorder ? lucabutera 1 Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted July 30, 2016 Share Posted July 30, 2016 15 hours ago, Calum MacPhail said: Great work on the speedbooster so far, great to see so much activity in regards to continuing what Samsung abandoned. The DIY community will be our only chance of seeing an electronic mount adapter for the NX, I cant see any companies (metabones, or even some of the newer chinese ones like Zhongyi), seeing this as an economically viable product. RockyMountains work is very interesting and I've been following his youtube channel for sometime. Without wanting to be an negative nancy, I think best case scenario we could end up with something like the earlier redrock adapters, with an external control unit. I happen to know a lot of engineers, including one that works for Thales Angenieux, I'll run the concept of a hardware adapter past them next I see them and see if I can get anyone to contribute. I remember that ihkim had already built something like a converter using arduino. He said that he could even create a dedicated chip for that. The only question mark was the power source, he was unsure if he could get the power from the NX1 or if external power (i.e. batteries) would have been required. Quote Link to comment Share on other sites More sharing options...
vaga Posted July 30, 2016 Share Posted July 30, 2016 I've been briefly reading into this, and it seems that for canon lenses, if you can provide a 6V power source, the motors will be fine. So can the NX output 6V? Probably. You may need a voltage divider or a (rechargeable) battery in the adapter. I haven't really looked into the NX side thoroughly yet. According to blueringer, NX outputs 5V, so depending on tolerance, you may need a small battery in the adapter. Of course, it will be important to know how much power the motors take. The data channels take almost no power (low current) Quote Link to comment Share on other sites More sharing options...
vaga Posted July 30, 2016 Share Posted July 30, 2016 As I'm reading blueringer, My thought would be to model the adapter signals to the camera based on the nx lens that has the most features and fastest AF. Do you all think that is a reasonable idea? Marco Tecno and Kisaha 2 Quote Link to comment Share on other sites More sharing options...
Calum MacPhail Posted July 30, 2016 Share Posted July 30, 2016 1 hour ago, vaga said: As I'm reading blueringer, My thought would be to model the adapter signals to the camera based on the nx lens that has the most features and fastest AF. Do you all think that is a reasonable idea? From what I've read, that would be the 16-50 f2-2.8 then. It's really a shame that the Pentax K adapter that Samsung made for their old lenses isn't active, we could have learned a lot from it. RockyMountains Arduino unit noted above is probably the closest we've come. Like I said I think we are most likely to have success with a dumb adapter at the NX end, that controls and powers a lens externally. Trying to create an adapter to allow the NX to do it itself is most likely outwith our limited collective R and D capabilities. Edit: It also occurs to me to ask what you guys would expect (be willing) to pay for such an adapter. With such limited production numbers, the cost per adapter will be much higher than most others on the market. lucabutera 1 Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted July 30, 2016 Share Posted July 30, 2016 I'm not an ingeneer, but...if ihkim could control BOTH nx AND ef with arduino, then couldn't a conversion be done among the protocols? vaga 1 Quote Link to comment Share on other sites More sharing options...
Calum MacPhail Posted July 30, 2016 Share Posted July 30, 2016 26 minutes ago, Marco Tecno said: I'm not an ingeneer, but...if ihkim could control BOTH nx AND ef with arduino, then couldn't a conversion be done among the protocols? Possibly, that would be a great outcome. EF lens control however is so much more understood than NX. Quote Link to comment Share on other sites More sharing options...
ttbek Posted July 30, 2016 Share Posted July 30, 2016 There are some potentially useful files for the AF in the NX30 open source firmware, just do a search of the extracted files for "lens" to find some interesting stuff. By my reading of the agreement when downloading the files I can't just tell you what's in there. I'm not sure if it tells us much more than ihkim's work, but it might fill in some values. If anyone doesn't know where to download those yet: http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=T&menu_item=photography&classification1=digital%20cameras I don't remember if these were still in the NX1/NX500 released files or not, that firmware is on my laptop at work and I don't want to download it again at the moment. Regarding my interest only in the Canon side of things, I own 0 Nikon lenses but quite a few Canon lenses, including now some long glass (400 f/2.8). Any optical design for the Canon will work for Nikon with only some length extension to the housing, but not vice versa if the Nikon design used that space. There are more Canon lenses that need the aperture control. So yes, a bit of a selfish interest, but that's how it is. vaga 1 Quote Link to comment Share on other sites More sharing options...
sidi Posted July 30, 2016 Share Posted July 30, 2016 6 hours ago, vaga said: I've been briefly reading into this, and it seems that for canon lenses, if you can provide a 6V power source, the motors will be fine. So can the NX output 6V? Probably. You may need a voltage divider or a (rechargeable) battery in the adapter. That would be probably a level shifter rather than a crude voltage divider. The power needed to run the conversion logic is so low that it shouldn't be a problem to just take it from camera body in the final revision of the intelligent SB (not running inefficient ATmega). 4 hours ago, Marco Tecno said: I'm not an ingeneer, but...if ihkim could control BOTH nx AND ef with arduino, then couldn't a conversion be done among the protocols? Probably more along the lines of FPGA or an ARM (ultra low current Gecko maybe). Note that I haven't looked at the communication protocols so I don't know if it's a matter of simple lookup table or how much more number crunching needs to be done. Marco Tecno 1 Quote Link to comment Share on other sites More sharing options...
Otto K Posted July 30, 2016 Share Posted July 30, 2016 @kidzrevil Can't speak for others but I have nx500 so no evf from me Great work Luca, I tried something similar (but much more primitive) with m42 a long time ago but I was unable to position the added elements precisely enough and got mostly useless results - your results are very positive! Regarding canon vs nikon - yes it is true that due to longer flange straight adapter will not work, but let's wait and see how much of the space is actually used by this adapter - it might be doable to shave a millimeter or there and get canon lenses to work. lucabutera 1 Quote Link to comment Share on other sites More sharing options...
vaga Posted July 30, 2016 Share Posted July 30, 2016 I don't think you will need FPGA or anything more complicated. The most complicated parts seem to be the setup of the lens in the nx protocol. After the setup section, it should be more or less straight look up. Marco Tecno 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.