IronFilm Posted March 8, 2016 Share Posted March 8, 2016 I'm on the fence about which one of these two cheapie boom poles to get, and would appreciate some feedback. I guess the "On Stage" is the better one, however the "Cavision" is *half* the weight! Which I reckon could be a significant factor by the end of a long day. http://www.bhphotovideo.com/c/product/770230-REG/On_Stage_56791_MBP7000_Microphone_Boom_Pole.html http://www.bhphotovideo.com/c/product/442571-REG/Cavision_SGP323_SGP323_2_3m_Glass_Fiber.html This also looks tempting, is nearly 3m and is only about a hundred bucks (with FREE shipping! An important consideration when it is often expensive to get to NZ :-/ ). So a little more expensive than either of the other two, but has hugely more reach. (& from the pictures it looks like it allows internal cabling too!) http://www.ebay.com/itm/Miliboo-Z901-87-5-294cm-Carbon-Fiber-Mic-Microphone-Telescoping-Boom-Pole-Rod-/361275326307 Oohhh.... Aliexpress has the Miliboo Z901 at an even cheaper price: http://www.aliexpress.com/item/Miloboo-carbon-fiber-4-sections-microphone-Handheld-Grip-Rig-Support-Rod-Flash-Light-LED-Light-Boom/32332844915.html Has a slightly different tip however to the eBay one however So don't think this one would allow internal cabling?? Thus I think the extra $12 to get a tip that allows internal cabling (plus a few other extras like a case for the pole) would be worth it: http://www.aliexpress.com/item/Free-shipping-Miloboo-carbon-fiber-4-sections-microphone-Handheld-Grip-Rig-Support-Rod-Flash-Light-LED/32278111738.html Thoughts? Quote Link to comment Share on other sites More sharing options...
IronFilm Posted March 8, 2016 Author Share Posted March 8, 2016 Well.... I have just had a frustrating attempt at communicating with the seller for this: http://www.aliexpress.com/item/Miloboo-carbon-fiber-4-sections-microphone-Handheld-Grip-Rig-Support-Rod-Flash-Light-LED-Light-Boom/32332844915.html Because I wanted clarification on the tip used at the end of the boom pole (if I could run internal cabling through it, like on other Miloboo Z901 ones I've seen listed). First response: a single happy face emoji! :-o What the hell, that is no kind of response at all Thinking that perhaps they did not understand me, I tried again but in Chinese (" 如果你觉得用英文不方便表达，也可以用中文。"). Second response: the single word "sorry". Huh, seriously? Hmmmmm..... I'll take this as a hint to buy from a different seller instead. Thus I feel I shall go with this one here instead: http://www.aliexpress.com/item/Free-shipping-Miloboo-carbon-fiber-4-sections-microphone-Handheld-Grip-Rig-Support-Rod-Flash-Light-LED/32278111738.html Nikkor 1 Quote Link to comment Share on other sites More sharing options...
AaronChicago Posted March 8, 2016 Share Posted March 8, 2016 Internal cabling is a huge benefit. I'd spring for that extra $12. Quote Link to comment Share on other sites More sharing options...
IronFilm Posted March 9, 2016 Author Share Posted March 9, 2016 I did!! :-D Purchased it a few hours ago. I will need to construct by hand however an XLR cable to pass through Quote Link to comment Share on other sites More sharing options...
a1x_0 Posted July 10, 2016 Share Posted July 10, 2016 Hello. Did you get it yet? Is it good? Was it easy to internally cable it? Thanks Quote Link to comment Share on other sites More sharing options...
IronFilm Posted July 10, 2016 Author Share Posted July 10, 2016 I haven't done internal cabling with it yet. My plan is instead to get a wireless XLR plug in once the Saramonic UwMic10 XLR plug in transmitter starts to ship. But I haven't be often using it, is great, very lightweight! Going to later this year buy the Came TV boom pole as well, so I've got an even longer ball, and to act as a 2nd back up pole to my main Miloboo pole. http://www.came-tv.com/cametv-carbon-fiber-microphone-boom-stand-5-meters-164ft-p-739.html Quote Link to comment Share on other sites More sharing options...
gh2sound Posted July 10, 2016 Share Posted July 10, 2016 Be careful of internal routing booms - you will get creak and pinging if not properly dampened. Quote Link to comment Share on other sites More sharing options...
funkyou86 Posted July 10, 2016 Share Posted July 10, 2016 I needed quickly a boom pole for a project but I had no time to order it so I made it myself :D looks a bit ridiculous, but worked very well It is made from an extendable pole (for painters), something like this, one T tube, one reduction tube and some rubber bands, costs me around 7 euros :D works like a charm with the NTG-2 :D iamoui, Dan Wake, Justin Bacle and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Dan Wake Posted October 30, 2016 Share Posted October 30, 2016 On 10/7/2016 at 11:59 AM, IronFilm said: I haven't done internal cabling with it yet. My plan is instead to get a wireless XLR plug in once the Saramonic UwMic10 XLR plug in transmitter starts to ship. But I haven't be often using it, is great, very lightweight! Going to later this year buy the Came TV boom pole as well, so I've got an even longer ball, and to act as a 2nd back up pole to my main Miloboo pole. http://www.came-tv.com/cametv-carbon-fiber-microphone-boom-stand-5-meters-164ft-p-739.html how good are Miloboo and catv boompoles? does perform any creak noise from the joints when full extended by moving the boompole? thx Quote Link to comment Share on other sites More sharing options...
Davey Posted October 30, 2016 Share Posted October 30, 2016 On 10/07/2016 at 2:37 PM, funkyou86 said: I needed quickly a boom pole for a project but I had no time to order it so I made it myself :D looks a bit ridiculous, but worked very well It is made from an extendable pole (for painters), something like this, one T tube, one reduction tube and some rubber bands, costs me around 7 euros :D works like a charm with the NTG-2 :D I love stuff like this. Made my own bridge superzoom rain cover using a dense plastic bag and a Saxo salt container that just happened to be a sliding push fit on the housing around the lens. Looked ridiculous but got me shots that the broadcast cameras couldn't get at a number of events where it was smashing it down. Just finished making one for my a7sii and 55mm that sits on the lens hood and protrudes four inches from the glass without any vignetting. Used a Bisto gravy container and stepped down the diameter by using insulation tape (needed three millimetres packing to get a push fit). At the screen end I have a semicircular canopy that allows some latitude beyond keeping the camera horizontal and I can get in to see the EVF if need be. Rain covers are £10-£40 but are poorly designed and don't keep the glass free of spots. Mine cost £1 for the insulation tape. Will be using it in London next weekend where the weather is notoriously wet during November, though I am now hoping we have a load of snow funkyou86 1 Quote Link to comment Share on other sites More sharing options...
IronFilm Posted October 30, 2016 Author Share Posted October 30, 2016 8 hours ago, Dan Wake said: how good are Miloboo and catv boompoles? does perform any creak noise from the joints when full extended by moving the boompole? thx Nope none, I can't compare it with any high end expensive boom poles as haven't used them, but I am very happy with my Miloboo boom pole. I use it all the time, used it again yesterday! Quote Link to comment Share on other sites More sharing options...
Dan Wake Posted October 30, 2016 Share Posted October 30, 2016 8 hours ago, IronFilm said: Nope none, I can't compare it with any high end expensive boom poles as haven't used them, but I am very happy with my Miloboo boom pole. I use it all the time, used it again yesterday! thx for reply may I ask you to do this test please? I would be really grateful! Quote Link to comment Share on other sites More sharing options...
IronFilm Posted October 30, 2016 Author Share Posted October 30, 2016 Nah, I don't hear that in practical use, and it looks like he needs a much better shock mount as well. Quote Link to comment Share on other sites More sharing options...
Kisaha Posted October 31, 2016 Share Posted October 31, 2016 The Rode boompole Pro is alright too. Quite cheap, carbon fiber and has the Rycote patended connection mechanism that it used to be my favorite when I was using Rycote booms. Unfortunately they sold the patent to Rode, and they made something slightly cheaper, but slightly worst too, but for the money you are getting an alright boom, and with a case. Quote Link to comment Share on other sites More sharing options...
Orangenz Posted October 31, 2016 Share Posted October 31, 2016 I have https://www.bhphotovideo.com/c/product/319988-REG/K_Tek_KE_89CC_KE_89CC_Avalon_Series_Aluminum.html if you want to have a play with it. IronFilm 1 Quote Link to comment Share on other sites More sharing options...
IronFilm Posted October 31, 2016 Author Share Posted October 31, 2016 2 hours ago, Orangenz said: I have https://www.bhphotovideo.com/c/product/319988-REG/K_Tek_KE_89CC_KE_89CC_Avalon_Series_Aluminum.html if you want to have a play with it. Hey, do you live in Auckland as well? Quote Link to comment Share on other sites More sharing options...
Orangenz Posted October 31, 2016 Share Posted October 31, 2016 7 hours ago, IronFilm said: Hey, do you live in Auckland as well? Roskill Quote Link to comment Share on other sites More sharing options...
IronFilm Posted October 31, 2016 Author Share Posted October 31, 2016 Nifty, I'm in Auckland CBD!! :-D Need to organise an Auckland EOSHD meetup? Quote Link to comment Share on other sites More sharing options...
Dan Wake Posted March 11, 2017 Share Posted March 11, 2017 On 30/10/2016 at 3:17 PM, IronFilm said: Nope none, I can't compare it with any high end expensive boom poles as haven't used them, but I am very happy with my Miloboo boom pole. I use it all the time, used it again yesterday! I wish to buy the Miloboo soon may I ask you a question please? What are the ring locks made of, metal or plastic? thanks a lot Quote Link to comment Share on other sites More sharing options...
BenEricson Posted March 11, 2017 Share Posted March 11, 2017 On 10/31/2016 at 4:31 AM, Orangenz said: I have https://www.bhphotovideo.com/c/product/319988-REG/K_Tek_KE_89CC_KE_89CC_Avalon_Series_Aluminum.html if you want to have a play with it. Can vouch for this boom pole. I have used this on probably 100 interview shoots. It is very compact and reliable. Make sure you get a bag for it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.