AaronL Posted May 1, 2016 Share Posted May 1, 2016 3 hours ago, Herb said: kidzrevil, Can you detail your settings in the latest video you uploaded?: wow that looks amazing, also very interested in the settings. also what film grain did you use? Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted May 1, 2016 Share Posted May 1, 2016 @Herb @AaronL normal gamma : standard contrast : 0 saturation : -4 sharpness : -10 (can go to -5 in certain situations) hue : -9 master pedestal : 8 (will try 15) Luma range : 0-255 I'm writing a guide with all my settings. This one is very experimental but I like it :-) Quote Link to comment Share on other sites More sharing options...
SMGJohn Posted May 2, 2016 Share Posted May 2, 2016 21 hours ago, kidzrevil said: @Herb @AaronL normal gamma : standard contrast : 0 saturation : -4 sharpness : -10 (can go to -5 in certain situations) hue : -9 master pedestal : 8 (will try 15) Luma range : 0-255 I'm writing a guide with all my settings. This one is very experimental but I like it :-) I think I wrote down all your settings you published keeping them in my Word document, I am experimenting trying to make a LUT out of them so I can apply them to my RAW images and if needed to my flat images, so far looking quite good. Its just a shame we cannot save picture profiles as presets and gotta use the 3 custom ones which are just 3 out of. Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted May 2, 2016 Share Posted May 2, 2016 nice ! let me know how the LUT works out for you. I'm glad you like it, I really like what the hue does to the skin tones especially in post production. I haven't used the custom profiles because they all seem to be the standard picture profile. I like to use the other profiles like portrait and landscape for their subtle differences in contrast ant saturation so I stay away from the custom profile do you mind helping me test this picture profile using -5 sharpness with the high bit rate hack ? I have a theory about the cameras in camera sharpness and how it affects noise reduction. @AaronL I am using film convert for the grain. Grain size is always either super 35mm or 35mm perf to match the sensor size. Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted May 2, 2016 Share Posted May 2, 2016 What about Andrew's settings and loglut? Btw I'm a bit surprised he is not testing the nx1 with the new bitrates. Quote Link to comment Share on other sites More sharing options...
SMGJohn Posted May 2, 2016 Share Posted May 2, 2016 1 hour ago, kidzrevil said: nice ! let me know how the LUT works out for you. I'm glad you like it, I really like what the hue does to the skin tones especially in post production. I haven't used the custom profiles because they all seem to be the standard picture profile. I like to use the other profiles like portrait and landscape for their subtle differences in contrast ant saturation so I stay away from the custom profile do you mind helping me test this picture profile using -5 sharpness with the high bit rate hack ? I have a theory about the cameras in camera sharpness and how it affects noise reduction. @AaronL I am using film convert for the grain. Grain size is always either super 35mm or 35mm perf to match the sensor size. The higher sharpness the noise will also get sharpened at least from my own experience, I was testing out the sharpness when I got the camera in 2014 and it seemed to do some funky stuff with the noise when the sharpness was adjusted, cannot say it was pretty. But that was way back, I will see what happens. Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted May 2, 2016 Share Posted May 2, 2016 Me too ! I have been working on in camera settings that work well with the codec and in post production. Popular LUT's from visioncolor,koji & deluts work damn good with what I came up with. So far I have finallized everything except my sharpness settings. I have a theory that the in camera sharpness affect the NR @Marco Tecno Quote Link to comment Share on other sites More sharing options...
Herb Posted May 2, 2016 Share Posted May 2, 2016 kidzrevil, Which deluts? James has so many... Quote Link to comment Share on other sites More sharing options...
SMGJohn Posted May 2, 2016 Share Posted May 2, 2016 26 minutes ago, kidzrevil said: Me too ! I have been working on in camera settings that work well with the codec and in post production. Popular LUT's from visioncolor,koji & deluts work damn good with what I came up with. So far I have finallized everything except my sharpness settings. I have a theory that the in camera sharpness affect the NR @Marco Tecno Well I tried testing them, after I saw this result I shot some other but I honestly cannot see any difference whatsoever, I did this test in terrible lightning too. But then I tried the NX500 with the 1440p mode which has no NR and LOL, I think we should just wait until they disable the NR to be honest with you. I used your settings, NX500 does not have master pedestal neither can I set the luma range which sucks major "#&%/&¤ SAMMY NX1 - 3200ISO - LEFT -5 NR | RIGHT -10 NR SAMMY NX1 - 6400ISO - LEFT -5 NR | RIGHT -10 NR SAMMY NX500 - 3200ISO - LEFT -5 NR | RIGHT -10 NR Quote Link to comment Share on other sites More sharing options...
Marco Tecno Posted May 2, 2016 Share Posted May 2, 2016 Which one do you prefer? I enclose also the original file if you want to test on it your luts/grading. Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted May 2, 2016 Share Posted May 2, 2016 1 hour ago, Herb said: kidzrevil, Which deluts? James has so many... deluts v2. I hate his latest pack. It's super contrasty and overdone. I don't know what color space they are intended to be used with but even converting to log before using them I get lackluster results. Its more of an issue with the lut than the camera @Marco Tecno love the second image ! Quote Link to comment Share on other sites More sharing options...
outerbeat Posted May 2, 2016 Share Posted May 2, 2016 We tested NR all around and there is no evidence than NR on or off did any difference to footage in NX1 On nx500 with mod-pack there is the 2.5K enable option without NR whatsoever, well it's noisy allright )) Also here is the LUT for my 200mbps test footage if anyone interested, I did it myself, so, use it freely mercer and vaga 2 Quote Link to comment Share on other sites More sharing options...
MKSN Posted May 6, 2016 Share Posted May 6, 2016 200mbps test with 20mm f2.8 Short test Btw, sandisk extreme sdhc uhs-3 class10 (60mb/s) works great iamoui and Sawstory 2 Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted May 7, 2016 Share Posted May 7, 2016 200mbps with the asahi super takumar 50mm f1.4 Quote Link to comment Share on other sites More sharing options...
timmyturntable Posted May 10, 2016 Share Posted May 10, 2016 Kid...this looks awesome! How long did ti take you to do the hack and which one did you do? Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted May 10, 2016 Share Posted May 10, 2016 2 hours ago, timmyturntable said: Kid...this looks awesome! How long did ti take you to do the hack and which one did you do? after I installed the first time it was easy to get the others working. Took an hour not because it was that difficult but because I can be retarded when it comes to these stuff (i.e. magic lantern lol) for this one I used the kino seed 1.52 I think Quote Link to comment Share on other sites More sharing options...
outerbeat Posted May 14, 2016 Share Posted May 14, 2016 Samsung NX1 16-50 F2.0-2.8 S Lense NX-KS mod-pack v 1.59m UHD@30 180 mbps with audio Here are ungraded originals: first one from tripod, second one handhelded Marco Tecno 1 Quote Link to comment Share on other sites More sharing options...
MountneerMan Posted May 24, 2016 Share Posted May 24, 2016 On 4/4/2016 at 8:51 AM, MountneerMan said: Compressed video usually only records the change in pixels compared to a reference frame. http://www.axis.com/global/en/learning/web-articles/technical-guide-to-network-video/video-compression-guide So a very detailed scene could have the same bitrate as a pure black scene as long as nothing is moving in either. Every few seconds a new reference frame is encoded witch would cause the bitrate to jump especially in a very detailed scene. Honestly I am a pretty big noob when it comes to all this stuff and there are a lot of people on here who know and understand this stuff alot better than me but this is how I understand it. I just watched this video that I thought some of you might like regarding video compression. most if not all of you will already know this but it a cool video demonstration none the less. Side note I like it when he throws his coat out of the Ae screen. Cool little effect lol. BrorSvensson and BopBill 2 Quote Link to comment Share on other sites More sharing options...
cojocaru27 Posted June 13, 2016 Share Posted June 13, 2016 so, any footage coming from nx1 2.5k 200mbs hack? thx vaga 1 Quote Link to comment Share on other sites More sharing options...
MKSN Posted June 13, 2016 Share Posted June 13, 2016 Tested Vasile´s patch v4.12 today. Clips 100fps and 50fps 1080p. NX1 with Canon 50mm 1.8 FD lens. ISO100 GammaDR / Sat -3 / Sha -7 / Hue -9 / MBL +15 M31 Lut + curves Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.