keessie65 Posted December 30, 2017 Share Posted December 30, 2017 Now filming for a few days in The Efteling, the Netherlands. Because of the low light at evening I decided to build my setup; NX1 + NXL speedbooster + Mamiya 55mm f1.4 + Bolex 16/32/1.5x + Rectilux HCDNA. I had to set the lens not at infinity, but somewhere about 10 meters to get the sharpest results. The film follows later, for now a few pictures. After all, I am very happy with the NXL speedbooster. lucabutera and Kisaha 2 Quote Link to comment Share on other sites More sharing options...
Matthew Hartman Posted December 31, 2017 Share Posted December 31, 2017 2 hours ago, keessie65 said: Now filming for a few days in The Efteling, the Netherlands. Because of the low light at evening I decided to build my setup; NX1 + NXL speedbooster + Mamiya 55mm f1.4 + Bolex 16/32/1.5x + Rectilux HCDNA. I had to set the lens not at infinity, but somewhere about 10 meters to get the sharpest results. The film follows later, for now a few pictures. After all, I am very happy with the NXL speedbooster. Colors look rich and the image clean. Can't wait to see the film. Quote Link to comment Share on other sites More sharing options...
IronFilm Posted January 9, 2018 Share Posted January 9, 2018 On 12/28/2017 at 12:59 PM, Matthew Hartman said: I was looking at the Rokinon XEEN series but at that point as might as well just buy an Alexa and sell the blood of my first born child. ? Yeah if a person is shooting with a DSLR/mirrorless then they should just get Rokinon Cine DS lenses for identical image quality instead. Is what I did:http://ironfilm.co.nz/rokinon-cine-lenses/ Quote Link to comment Share on other sites More sharing options...
homestar_kevin Posted October 4, 2018 Share Posted October 4, 2018 Hey guys, I Recently acquired one of Luca's awesome NXL adapters locally. The adapter is awesome and really well designed When mounting it on my NX1, everything mounts great, but when I press the shutter button the camera gives me an error 01. This works fine for video, but I was wanting to use the adapter for stills as well. Does anyone have experience with this? I have also mounted the NXL on my nx500 and have not received the error message. I'm just curious to see what causes this/if this is common and how to go about fixing it Quote Link to comment Share on other sites More sharing options...
Drew Veeneman Posted October 4, 2018 Share Posted October 4, 2018 @homestar_kevin, I've been using the NXL on my NX1 and NX500 for well over a year now. I've never seen that error in regards to taking photos. Quote Link to comment Share on other sites More sharing options...
homestar_kevin Posted October 4, 2018 Share Posted October 4, 2018 Thanks Drew! In researching Error 01 I've seen some things like Bad battery or lens connection upto a thread on this forum about a shutter curtain problem. I'm not experiencing the shutter curtain issue at all, but am trying to hear from other users in order to figure out what's going on with mine. I appreciate you sharing your experience. Your NXL Footage with the Super Takumars has always looked absolutely awesome and was a push for me to grab one when it came up (not that I needed a huge push to want one) Quote Link to comment Share on other sites More sharing options...
Sunscreen Posted November 5, 2018 Share Posted November 5, 2018 On 10/4/2018 at 3:26 PM, homestar_kevin said: When mounting it on my NX1, everything mounts great, but when I press the shutter button the camera gives me an error 01. This works fine for video, but I was wanting to use the adapter for stills as well. I have also mounted the NXL on my nx500 and have not received the error message. I'm experiencing the same "error 01" issue on my NX1 when taking a photo with the NXL & Nikkor Ai-S glass. The NX500 + NXL + Nikkor glass combination takes photos without the "error 01" issue. NX1 fw:1.41, NX500 fw:1.12. Vasile hack installed on both NX bodies. Quote Link to comment Share on other sites More sharing options...
Kisaha Posted November 5, 2018 Share Posted November 5, 2018 @lucabutera this is an open letter to anyone, but to Luca more specifically. I am sure a lot of us will be, or are interested in, buying the new BlackMagic Pocket 4K, and already are planning their accessories and lenses. My question is, is it possible to adapt NX lenses to the Pocket 4K? It is seriously a shame to put all those great lenses to a closet and buying Tamron and Sigma EF ones. Quote Link to comment Share on other sites More sharing options...
keessie65 Posted November 5, 2018 Share Posted November 5, 2018 10 minutes ago, Kisaha said: @lucabutera this is an open letter to anyone, but to Luca more specifically. I am sure a lot of us will be, or are interested in, buying the new BlackMagic Pocket 4K, and already are planning their accessories and lenses. My question is, is it possible to adapt NX lenses to the Pocket 4K? It is seriously a shame to put all those great lenses to a closet and buying Tamron and Sigma EF ones. More looking forward to adapt NX lenses on Fuji APS-C ? The X-T3 or later X-H2. Quote Link to comment Share on other sites More sharing options...
Kisaha Posted November 5, 2018 Share Posted November 5, 2018 9 minutes ago, keessie65 said: More looking forward to adapt NX lenses on Fuji APS-C ? The X-T3 or later X-H2. Fuji have their own great lenses that will focus faster and communicate better than any other adapted lens, ever. BlackMagic doesn't make any lenses ? !! Quote Link to comment Share on other sites More sharing options...
homestar_kevin Posted November 5, 2018 Share Posted November 5, 2018 16 hours ago, Sunscreen said: I'm experiencing the same "error 01" issue on my NX1 when taking a photo with the NXL & Nikkor Ai-S glass. The NX500 + NXL + Nikkor glass combination takes photos without the "error 01" issue. NX1 fw:1.41, NX500 fw:1.12. Vasile hack installed on both NX bodies. Hey Sunscreen, Thanks for the reply. I'm still experiencing the same issue you are. I have not had time to send my NX1 into a service center or take any real further actions. I know I'm on the same Firmware as you on both cameras. I do not have the Vasile Hack on my bodies, but I receive the Error 01 message as well on the nx1. I'm wondering if it's about the adapter making contact with the lens mount or if there is something more to this because I do not receive this message with any other adapter or lens combo that I have, and I have quite a few NX lens mount adapters. I'm half worried to send it in and have it be the shutter certain or something pretty severe, especially when my nx1 works perfectly in all modes with both native and adapted glass. Mehhh, dangers of a dead system I suppose Quote Link to comment Share on other sites More sharing options...
Sunscreen Posted November 10, 2018 Share Posted November 10, 2018 @homestar_kevin I wouldn't suggest sending in your NX1 to a service center. My thinking is the same as you in regards to the error. I believe it's because of the adapter. I suggest avoiding taking stills with the NXL on the NX1. Stick to video only with the NXL + NX1 combo. I believe a re-occurring "Error 01" isn't good for the longevity of the NX1 shutter. Happy shooting! Quote Link to comment Share on other sites More sharing options...
Fu-Raz Posted March 12, 2019 Share Posted March 12, 2019 I just bought this camera recently and I really wish this speed booster was still available. lucabutera 1 Quote Link to comment Share on other sites More sharing options...
lucabutera Posted March 20, 2019 Author Share Posted March 20, 2019 On 3/12/2019 at 7:11 PM, Fu-Raz said: I just bought this camera recently and I really wish this speed booster was still available. Recently I had a lot of requests, so I decided to do a limited production. keessie65 1 Quote Link to comment Share on other sites More sharing options...
Kisaha Posted March 20, 2019 Share Posted March 20, 2019 1 hour ago, lucabutera said: Recently I had a lot of requests, so I decided to do a limited production. How much would that be, Luca? Quote Link to comment Share on other sites More sharing options...
Kisaha Posted March 24, 2019 Share Posted March 24, 2019 On 3/20/2019 at 10:16 PM, lucabutera said: Recently I had a lot of requests, so I decided to do a limited production. Are you going to tell us more about it? I am not on FB, by the way. Quote Link to comment Share on other sites More sharing options...
lucabutera Posted April 6, 2019 Author Share Posted April 6, 2019 On 3/24/2019 at 11:40 AM, Kisaha said: Are you going to tell us more about it? I am not on FB, by the way. Lately I've been devoting a lot to the Magicbooster for Blackmagic cameras. NXL production is limited to only 10 pieces. Quote Link to comment Share on other sites More sharing options...
lucabutera Posted April 11, 2019 Author Share Posted April 11, 2019 keessie65 and Kisaha 2 Quote Link to comment Share on other sites More sharing options...
Kisaha Posted April 12, 2019 Share Posted April 12, 2019 18 hours ago, lucabutera said: Price?! Price of the simple NX-L?! Give us something Luca! Quote Link to comment Share on other sites More sharing options...
lucabutera Posted May 2, 2019 Author Share Posted May 2, 2019 On 4/12/2019 at 4:28 PM, Kisaha said: Price?! Price of the simple NX-L?! Give us something Luca! Recently I decided to get paid only with pornographic material provided by artificial intelligence. Drew Veeneman 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.