jpfilmz Posted April 8, 2017 Share Posted April 8, 2017 14 hours ago, Hanriverprod said: W H added some new shots to the previous video: 3k 14 Bit RAW Compression Lossless Test This video is absolutely fantastic! Hanriverprod 1 Quote Link to comment Share on other sites More sharing options...
squig Posted April 8, 2017 Share Posted April 8, 2017 3 hours ago, cpc said: So how's the rolling shutter in the higher resolutions? 3K 24p rolling shutter is about the same as 1080p, <20ms Quote Link to comment Share on other sites More sharing options...
squig Posted April 8, 2017 Share Posted April 8, 2017 Actually, looks like rolling shutter is a bit higher: 1080p 24p standard 1x crop raw is 18ms. 3K 16:9 is 31.9ms according to ML. a1ex may be able to reduce that a bit if and when he enables FPS override. Quote Link to comment Share on other sites More sharing options...
kaylee Posted April 8, 2017 Share Posted April 8, 2017 15 hours ago, Hanriverprod said: W H added some new shots to the previous video: wow ? thats........ a lot more resolving power than we had last month. omg. this is exciting!!! Hanriverprod 1 Quote Link to comment Share on other sites More sharing options...
Hanriverprod Posted April 8, 2017 Share Posted April 8, 2017 Magic Lantern 5k/4k/3k RAW Test Shots : Not my footage but I'm excited for you guys who have this camera right now. This is pretty exciting times for you owners. neosushi 1 Quote Link to comment Share on other sites More sharing options...
Jimmy Posted April 8, 2017 Share Posted April 8, 2017 I don't wanna sound like i'm moaning... but is there a reason the HFR modes aren't being tested, is it not implemented yet? Keep up the good work guys, I have a bid on a 5Diii as we speak, I have regretted selling my 5Diii to get an A7s for some time now and this has pushed me to sell the Sony and get back on board! kaylee and zerocool22 2 Quote Link to comment Share on other sites More sharing options...
kaylee Posted April 8, 2017 Share Posted April 8, 2017 9 minutes ago, Jimmy said: I have a bid on a 5Diii as we speak 5d3 raw kidz need to form a gang Jimmy 1 Quote Link to comment Share on other sites More sharing options...
squig Posted April 8, 2017 Share Posted April 8, 2017 1 hour ago, Jimmy said: I don't wanna sound like i'm moaning... but is there a reason the HFR modes aren't being tested, is it not implemented yet? They are being tested, but they're quite buggy. I sold my A7s too, the MK3 raw is so much better. Quote Link to comment Share on other sites More sharing options...
anto Posted April 8, 2017 Share Posted April 8, 2017 2 hours ago, squig said: They are being tested, but they're quite buggy. I sold my A7s too, the MK3 raw is so much better. I sold my A7s too odie 1 Quote Link to comment Share on other sites More sharing options...
odie Posted April 8, 2017 Share Posted April 8, 2017 i'm shooting on super 16mm which I love and is really beautiful and unique ( which I recommend everyone to try to incorporate in their work flow and shooting assignments for fun or professionally) my digital experience professionally is working with cameras like alexa..and I think people will even be selling their high end cameras with this new development at ML Quote Link to comment Share on other sites More sharing options...
tigerbengal Posted April 9, 2017 Share Posted April 9, 2017 On 4/4/2017 at 3:16 AM, Andrew Reid said: Why is 1.1.3 better? Sorry for my late response Andrew, from ML web site, here are the reasons behind it: Most important changes in 1.2.3 since 1.1.3 (source): - clean HDMI out - dual monitor support - AF at f/8 with teleconverters - fixed an AFMA bug - a bunch of minor fixes Unfortunately, in order to implement the dual monitor feature, Canon made some major changes on the display side (changed some low-level registers) and LiveView implementation (which is now quad-buffered, while on 1.1.3 it's triple-buffered, just like in all other ML-enabled cameras). From ML's point of view, this resulted in the following differences: - 1.1.3 is slightly faster when recording RAW/MLV (not much, only a few MB/s) - fast zebras are not working on 1.2.3 or later, but they are OK on 1.1.3 - no full-screen magic zoom on 1.2.3 or later - no brightness/contrast/saturation adjutments on 1.2.3 or later - "DIGIC peaking" is a little more limited on 1.2.3 or later (only the basic mode is working, not the ones with fancy backgrounds) - motion detection in "frame difference" mode does not work on 1.2.3 or later - I'm not sure if corrupted frames are still an issue (if you experience them, try downgrading to 1.1.3) Other than that, the two ML versions are pretty much identical. Hanriverprod and Tai Klyce 2 Quote Link to comment Share on other sites More sharing options...
SlanderShot Posted April 9, 2017 Share Posted April 9, 2017 Here a small test : 3009 x 1280@24p (upscale to 4k) + 14 bits lossless = continuous shooting. I used the new ML Cinelog-C to Ektar 100 LANDSCAPE lut of @hyalinejim Graded in Davinci Resolve 12.5, edited in Premiere. iamoui, tweak, Hanriverprod and 3 others 6 Quote Link to comment Share on other sites More sharing options...
mercer Posted April 9, 2017 Share Posted April 9, 2017 2 hours ago, SlanderShot said: Here a small test : 3009 x 1280@24p (upscale to 4k) + 14 bits lossless = continuous shooting. I used the new ML Cinelog-C to Ektar 100 LANDSCAPE lut of @hyalinejim Graded in Davinci Resolve 12.5, edited in Premiere. Holy Shit, that looks good. Loved the swing set shots! Quote Link to comment Share on other sites More sharing options...
Hanriverprod Posted April 10, 2017 Share Posted April 10, 2017 7 hours ago, SlanderShot said: Here a small test : 3009 x 1280@24p (upscale to 4k) + 14 bits lossless = continuous shooting. I used the new ML Cinelog-C to Ektar 100 LANDSCAPE lut of @hyalinejim Graded in Davinci Resolve 12.5, edited in Premiere. Looks nice. Are you getting full live-view with this setting? Also, is hdmi out monitoring possible with raw above hd resolution? Quote Link to comment Share on other sites More sharing options...
SlanderShot Posted April 10, 2017 Share Posted April 10, 2017 Thanks you @mercer and @Hanriverprod. I get the good resolution for framing, but it's a mix and grayscale and colored preview (still not easy with this preview and hope the ML team will find something more comfy). I don't tried yet hdmi monitoring. Hanriverprod and mercer 2 Quote Link to comment Share on other sites More sharing options...
Hanriverprod Posted April 10, 2017 Share Posted April 10, 2017 28 minutes ago, SlanderShot said: Thanks you @mercer and @Hanriverprod. I get the good resolution for framing, but it's a mix and grayscale and colored preview (still not easy with this preview and hope the ML team will find something more comfy). I don't tried yet hdmi monitoring. I'm itching to pick one up, but I think I'll wait to see if this live-view gets sorted out. For production work, the hdmi monitoring needs to work as well. It just needs to be above around 2.8k 2:4 I think to down res nice to 2k with a workable crop. Quote Link to comment Share on other sites More sharing options...
Hanriverprod Posted April 10, 2017 Share Posted April 10, 2017 Canon 5D mkIII 10bit Raw 3.8K test Quote Link to comment Share on other sites More sharing options...
Taranis Posted April 10, 2017 Share Posted April 10, 2017 26 minutes ago, Hanriverprod said: Canon 5D mkIII 10bit Raw 3.8K test It seems some kind of stabiliztation will be necessary for these high resolution modes. The wobbling is a bit distracting. Quote Link to comment Share on other sites More sharing options...
Window_Frame Posted April 10, 2017 Share Posted April 10, 2017 How does it compare to the NX1 just in terms of detail? Quote Link to comment Share on other sites More sharing options...
Taranis Posted April 10, 2017 Share Posted April 10, 2017 2 hours ago, Window_Frame said: How does it compare to the NX1 just in terms of detail? Judging by the examples shown so far, it's no match for the NX1 in terms of detail, but that was to be expected, as the NX1 downsamples from 6.5K. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.