sanveer Posted July 4, 2017 Share Posted July 4, 2017 3 hours ago, BTM_Pix said: EDIT >>>>> OK After harvesting commands, I can confirm that as I suspected it is game over for VLOG on the GX80/85. You all owe me £3.99 for that discovery Nooooooooooooooooo !!! Atleast no more of the guessing game. Quote Link to comment Share on other sites More sharing options...
jonpais Posted July 4, 2017 Share Posted July 4, 2017 BTM_Pix will mail each of you the code in 5-6 weeks so you can have the true Panasonic V-Log experience. Quote Link to comment Share on other sites More sharing options...
Anaconda_ Posted July 4, 2017 Share Posted July 4, 2017 Oh well, CineD is already more than expected when we all bought this camera. I don't think the score is 1-0, it's more like 0-1. So there's no V-Log, but you can't miss what you never had. Thanks again for the time and effort BTM_Pix. You rock! 7 Lakes, Chris Oh, BTM_Pix and 2 others 5 Quote Link to comment Share on other sites More sharing options...
matthiasd Posted July 4, 2017 Share Posted July 4, 2017 So would it be possible to get V-log for the panasonic g85? Grimor 1 Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted July 5, 2017 Author Super Members Share Posted July 5, 2017 16 hours ago, matthiasd said: So would it be possible to get V-log for the panasonic g85? Nope, unfortunately Adept 1 Quote Link to comment Share on other sites More sharing options...
milanesa Posted July 5, 2017 Share Posted July 5, 2017 How about V-Log in the G7? Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted July 5, 2017 Author Super Members Share Posted July 5, 2017 Nope. I've been doing most of the hardware controller development using a G7 so all VLOG messaging (including the one that is actually correct for the GH4) were tried a good while ago. Quote Link to comment Share on other sites More sharing options...
milanesa Posted July 5, 2017 Share Posted July 5, 2017 Thanks for all the work! BTM_Pix 1 Quote Link to comment Share on other sites More sharing options...
Grimor Posted July 5, 2017 Share Posted July 5, 2017 Whats the synthax of that last request? I could try some variants to at home. Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted July 5, 2017 Author Super Members Share Posted July 5, 2017 vlog_gamma It is definitely the correct command. The issue is at the camera end because it accepts it and actions it but just not in the right way. Exactly as it was a few weeks ago. Quote Link to comment Share on other sites More sharing options...
7 Lakes Posted July 6, 2017 Share Posted July 6, 2017 GX80/85 - 4 UHD 60 fps, please :)))) kidzrevil 1 Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted July 6, 2017 Share Posted July 6, 2017 2 minutes ago, 7 Lakes said: GX80/85 - 4 UHD 60 fps, please :)))) Or a bitrate hack im begging you LOL seriously 160-200 mbps 1080 & or 4k would be a god send Quote Link to comment Share on other sites More sharing options...
Orangenz Posted July 7, 2017 Share Posted July 7, 2017 Just tried it out on mate's GX85. So easy and so profound! Friend is quite blown away, flicking between standard and cine-D. He's pretty happy! Thanks @BTM_Pix BTM_Pix 1 Quote Link to comment Share on other sites More sharing options...
aldolega Posted July 7, 2017 Share Posted July 7, 2017 6 hours ago, kidzrevil said: Or a bitrate hack im begging you LOL seriously 160-200 mbps 1080 & or 4k would be a god send God yes. These cams desperately need a higher 1080p bitrate, 25mbps is just too low. A bump for 4K would be nice too, but much less needed IMO. kidzrevil 1 Quote Link to comment Share on other sites More sharing options...
mercer Posted July 7, 2017 Share Posted July 7, 2017 BTM can correct me if I'm wrong, but I believe this discovery is based upon turning on existing code within the camera and not hacking the code. Since the GX85 only shoots in MP4 and AVCHD without any MOV codec, I would think it's unlikely to up the bitrate. But I also vaguely remember seeing the high bitrate MOV codec in the original command list, but I think VLog was there as well and that wasn't possible. It would be great if someone from the NX1 hack could take a look at BTM's work and maybe together, they could come up with some more options, if it's even possible. If it is possible, someone should do it soon, because I have a feeling Panasonic will turn off all of these options in an upcoming firmware update. 7 Lakes and kidzrevil 2 Quote Link to comment Share on other sites More sharing options...
mmills Posted July 7, 2017 Share Posted July 7, 2017 @BTM_Pix What about changing frame rates in 4K Photo mode? It would be great to get 24fps vs the stock 30fps in this mode for shooting video with various aspect ratios. Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted July 7, 2017 Author Super Members Share Posted July 7, 2017 36 minutes ago, mmills said: @BTM_Pix What about changing frame rates in 4K Photo mode? It would be great to get 24fps vs the stock 30fps in this mode for shooting video with various aspect ratios. No, the rate is fixed internally. Your best bet to get it closer would be to do the region change to PAL so it would be 25fps Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted July 7, 2017 Share Posted July 7, 2017 15 hours ago, aldolega said: God yes. These cams desperately need a higher 1080p bitrate, 25mbps is just too low. A bump for 4K would be nice too, but much less needed IMO. way too low ! I feel like we need a bare minimum of 100 mbps in 1080 Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted July 7, 2017 Author Super Members Share Posted July 7, 2017 14 hours ago, mercer said: BTM can correct me if I'm wrong, but I believe this discovery is based upon turning on existing code within the camera and not hacking the code. Since the GX85 only shoots in MP4 and AVCHD without any MOV codec, I would think it's unlikely to up the bitrate. But I also vaguely remember seeing the high bitrate MOV codec in the original command list, but I think VLog was there as well and that wasn't possible. It would be great if someone from the NX1 hack could take a look at BTM's work and maybe together, they could come up with some more options, if it's even possible. If it is possible, someone should do it soon, because I have a feeling Panasonic will turn off all of these options in an upcoming firmware update. Its just remote control of features that the camera has so its all very high level. If it doesn't flat out reject them then it has an understanding of them but from there on its at the mercy of whats going on in the camera. So it doesn't reject the VLOG command it goes to an internal table and makes the settings that relate to that entry. The fact that it selects the Standard profile suggests that that is a holding copy that occupies that entry in the table which you could speculate means that maybe VLOG was considered as a future paid option for if not the GX80 then the G7 or G80. Ditto with the higher bitrate commands it doesn't reject selecting the highest bitrate one it currently allows. Anyhoo.... Just a bit of a hint that if you are interested in hardware control of your Panasonic camera then now would be a good time to go and vote for some features and which controller you would prefer to use. Threads are here and here Quote Link to comment Share on other sites More sharing options...
Grimor Posted July 7, 2017 Share Posted July 7, 2017 On 5/7/2017 at 7:10 PM, BTM_Pix said: vlog_gamma It is definitely the correct command. The issue is at the camera end because it accepts it and actions it but just not in the right way. Exactly as it was a few weeks ago. vlog_gamma & vlog_g can be found on different version of imgapp if you open it with apk editor (res/values/public.xml & string.xml if memory serves) Your gadget looks really cool. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.