LippyLee Posted September 4, 2017 Share Posted September 4, 2017 13 hours ago, ntblowz said: wonder if G85/GX85 support it? If it uses USB PTP, the focus pulling dial won't be supported on the G85 or GX85. Quote Link to comment Share on other sites More sharing options...
Don Kotlos Posted September 4, 2017 Share Posted September 4, 2017 "It's a focus wheel" "The sensitivity can be adjusted" "and then this one (the wheel on the bottom) for ISO" "Can it be set to adjust other parameters?" "Yes" "Currently only for Canon?" "Yes" https://www.youtube.com/watch?v=ewZJ_GW1tn8 ntblowz 1 Quote Link to comment Share on other sites More sharing options...
ntblowz Posted September 4, 2017 Share Posted September 4, 2017 1 hour ago, Don Kotlos said: "It's a focus wheel" "The sensitivity can be adjusted" "and then this one (the wheel on the bottom) for ISO" "Can it be set to adjust other parameters?" "Yes" "Currently only for Canon?" "Yes" https://www.youtube.com/watch?v=ewZJ_GW1tn8 will be really dumb if only Canon camera are supported for the follow focus, good thing I just bought a 200D but i really want to use GH5 on it. Quote Link to comment Share on other sites More sharing options...
midloch Posted September 5, 2017 Share Posted September 5, 2017 This will be insane, runtime 18 hours... According to their official website it seems to be for Panasonic. http://www.zhiyun-tech.com/crane_2_en/#youkuplayer Quote Link to comment Share on other sites More sharing options...
Don Kotlos Posted September 23, 2017 Share Posted September 23, 2017 Quote Link to comment Share on other sites More sharing options...
Kisaha Posted September 23, 2017 Share Posted September 23, 2017 A bit disappointing that you still can't see the monitor on tilt only displays, plus, what Judd is saying, is that it doesn't really work for lighter/smaller cameras, so, we have to turn to the Crane 1 v2 instead?! Do you people understand if this Crane 2 is much better than the Crane 1 (like, does it have better motors?). I am not exactly sold on the focus thing, and definitely I am not planning to buy any of those Canon's, so I am unsure if this is really the best gimbal, or I should go for the Crane 1v2. Do you believe is it workable for a bigger cam, like the C100mk2? Quote Link to comment Share on other sites More sharing options...
Don Kotlos Posted September 23, 2017 Share Posted September 23, 2017 Yeah focus only works with Canons and i doubt it will come to other cameras since manufacturers have to support it over USB.. Also the size is quite large so it can work with C100mk2 or FS5 but for smaller cameras crane 1 v2 might be a better (lighter & cheaper) solution. Kisaha 1 Quote Link to comment Share on other sites More sharing options...
Turboguard Posted September 24, 2017 Share Posted September 24, 2017 So, again, does this mean I can buy a gimbal finally for my bmpcc+speedbooster+sigma18-35 if I mount it on the speedbooster for balanced weight? I want one of these small gimbals and not a massive dji one Quote Link to comment Share on other sites More sharing options...
DBounce Posted September 24, 2017 Share Posted September 24, 2017 I returned my Feiyutech ɑ2000 last week. It was great... much more capable than the Crane V2, but when I saw it go on sale the following week, for almost half the price I paid, I considered it wise to return it and wait to see if they would also announce something substantially upgraded. FWIW, I did prefer the overall build quality of the Feiyutech to the Zhiyun Crane V2... although, Zhiyun might have stepped up their game for this release. After having used both I can report that the Crane V2 worked well with lighter lens setups. But adding an anamorphic adapter caused too much stress on the motors, leading to jittery footage when craning up and down. There was also insufficient travel from the back of the camera to the rear motor on the V2. Meaning, to balance the setup the eyepiece needed to be removed to allow the camera to clear the rear tilt motor. Conversely, the Feiyutech had ample travel, without any need to remove the eyepiece. And the motors were plenty strong to handle the load. I would love to see Feiyutech's take on this setup. Preferably, with a 45° mount option like on their smaller ɑ1000. Quote Link to comment Share on other sites More sharing options...
gethin Posted September 26, 2017 Share Posted September 26, 2017 On 03/09/2017 at 11:58 AM, scotchtape said: I hope they have improved the drifting horizon and response to g-forces. I tried using it in a car and the horizon really go out during and after turns. Not to mention you can notice it while moving normally (tilt up and down moving backwards or forwards and tilted horizon if moving so do sideways). I was thinking of using the V2 in a helicopter but after this experience don't think it will work very well. I know the older Ronin has tons of complaints for drifting horizon as well, but v2 sucks too for that. This seems to be common to all the gimbals. It's a big issue for what I use them for so if anyone knows one that doesn't do it I'm all ears Quote Link to comment Share on other sites More sharing options...
Andrew Clunie Posted October 14, 2017 Share Posted October 14, 2017 If you guys are interested in seeing the Sony accessory for use with the focus wheel, here is a photo. It looks similar (but less slicker) than the tilta equivalent on their nucleus N. I have ordered the crane 2 for my a7sii, and will probably get this when it's out. i am wondering if my anamorphic setup will be too heavy for this... probably. Quote Link to comment Share on other sites More sharing options...
thefactory Posted October 14, 2017 Share Posted October 14, 2017 1 hour ago, Andrew Clunie said: If you guys are interested in seeing the Sony accessory for use with the focus wheel, here is a photo. It looks similar (but less slicker) than the tilta equivalent on their nucleus N. I have ordered the crane 2 for my a7sii, and will probably get this when it's out. i am wondering if my anamorphic setup will be too heavy for this... probably. Interesting. I’m not sold on the focus wheel. Might be alright on the gh5 as you can see the screen flipped out to the side. The screen on my a7sii is not that great for manual focus. Miss a few shots when I use it without external monitor. And putting an external monitor on a single hand gimbal is not that appealing to me. Keen to see if it works though. Quote Link to comment Share on other sites More sharing options...
thefactory Posted October 16, 2017 Share Posted October 16, 2017 My camera store has these in stock now, so I thought I would have a play. The first thing you notice is the diameter of the grip. I don't have huge hands but they are not small either, and I found it almost too wide to hold. I like the feel of the old one much better. Its rated at a bigger payload so I suppose it's going to be bigger. Honestly, i think its too big for one hand gimbal work, which in my mind defeats the purpose of the one-handed gimbals. Will be sticking with the old crane for now. Quote Link to comment Share on other sites More sharing options...
mojo43 Posted October 16, 2017 Share Posted October 16, 2017 I spoke with someone from Zhiyun last night and they mentioned that they are making a follow focus attachment and it will be coming out soon. I also have a Crane 2 coming in today so let me know if you have anything you want me to check out. I will be reviewing it in the next week. gethin 1 Quote Link to comment Share on other sites More sharing options...
Ki Rin Posted October 16, 2017 Share Posted October 16, 2017 11 hours ago, mojo43 said: I spoke with someone from Zhiyun last night and they mentioned that they are making a follow focus attachment and it will be coming out soon. I also have a Crane 2 coming in today so let me know if you have anything you want me to check out. I will be reviewing it in the next week. If you have the V2 crane also, I'd love to know how they compare. Especially things like difference in weight etc.. Thanks! mojo43 1 Quote Link to comment Share on other sites More sharing options...
mojo43 Posted October 22, 2017 Share Posted October 22, 2017 Kisaha 1 Quote Link to comment Share on other sites More sharing options...
Kisaha Posted October 22, 2017 Share Posted October 22, 2017 I am waiting for the next video! The 3 Cranes are very different in load weight and function it seems. mojo43 1 Quote Link to comment Share on other sites More sharing options...
mojo43 Posted October 25, 2017 Share Posted October 25, 2017 Q Quote Link to comment Share on other sites More sharing options...
maxotics Posted October 25, 2017 Share Posted October 25, 2017 On 9/23/2017 at 1:19 PM, Kisaha said: A bit disappointing that you still can't see the monitor on tilt only displays, plus, what Judd is saying, is that it doesn't really work for lighter/smaller cameras, so, we have to turn to the Crane 1 v2 instead?! I've modified my vlogging mirror to work on gimbals. Kisaha 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.