JeremyDulac Posted January 9, 2018 Share Posted January 9, 2018 11 minutes ago, Sage said: Right, all adjustments (apart from white balance) should follow the conversion. Ok cool, that makes sense. But if we ettr should we bring that down before the lut? And that said, do you recommend ettr or are you of the belief that there is better tonality from exposing properly and not to the right? Quote Link to comment Share on other sites More sharing options...
Lukas Htzmedia Posted January 9, 2018 Share Posted January 9, 2018 Today i shot a musicvideo and i exposed so that Skintone was between 60-70 IRE using falsecolor with my new Feelword f570 (great budget Monitor works perfect with GH5!). With the Alexa conversion lut it looks awesome! Quote Link to comment Share on other sites More sharing options...
Sage Posted January 10, 2018 Author Share Posted January 10, 2018 Yes, all exposure adjustments should follow the conversion. Technically speaking, exposing to the right will maximize signal to noise ratio, resulting in less noise. With native color, there is a penalty to ettr because rolloff is problematic. With GHa, there is no rolloff penalty, so you can center the choice around protecting highlights as need be. Practically speaking, it will interact with GHa Soft for a different starting look. An underexposed image will be more saturated, and ettr will be less saturated and cleaner. Overall, the Main and Soft profiles were made for middle gray at 40 IRE. JeremyDulac 1 Quote Link to comment Share on other sites More sharing options...
Oliver Daniel Posted January 12, 2018 Share Posted January 12, 2018 @Sage, just bought your LUTS after seeing all these examples, looks like a no brainer. I'll let you know how I get on Quote Link to comment Share on other sites More sharing options...
Sage Posted January 12, 2018 Author Share Posted January 12, 2018 46 minutes ago, Oliver Daniel said: @Sage, just bought your LUTS after seeing all these examples, looks like a no brainer. I'll let you know how I get on Excellent, please do. With current progress, I think it is reasonable to say that there may be some exciting news later this year. Here are stills shared from David L'Abbée: Jonesy Jones 1 Quote Link to comment Share on other sites More sharing options...
Sage Posted January 14, 2018 Author Share Posted January 14, 2018 Couple more great stills from David: Jonesy Jones and Georgios 2 Quote Link to comment Share on other sites More sharing options...
JeremyDulac Posted January 15, 2018 Share Posted January 15, 2018 They look fantastic! Only the lut applied? Quote Link to comment Share on other sites More sharing options...
Sage Posted January 15, 2018 Author Share Posted January 15, 2018 2 hours ago, JeremyDulac said: They look fantastic! Only the lut applied? In the case of the bed, I believe that was only Main. He said the close up was Main, set to 78% saturation (in the realm of Soft) Quote Link to comment Share on other sites More sharing options...
JeremyDulac Posted January 23, 2018 Share Posted January 23, 2018 Ok, so I have been running some tests under fluorescent lighting that I am pretty sure is somewhere around 4800-5200(not sure because it is ceiling light at work). I have some stills here with the GHa tungsten then daylight applied and I am curious what everyone thinks looks best? @Sage Do you recommend using Tungsten for fluorescent or daylight? I also attached my film print graded version. I am really liking the way the GHa lut is grading! The highlight rolloff really is fantastic. Adept 1 Quote Link to comment Share on other sites More sharing options...
Sage Posted January 23, 2018 Author Share Posted January 23, 2018 Hey Jeremy; It can be a matter of taste, as technically there is no correct way at the moment. If above 4500, it is closer to daylight, and below, tungsten. And each tube will differ in it's spectrum, so the most fitting conversion may vary from it's proximity to one end or the other. Go with what feels most right ; ) JeremyDulac 1 Quote Link to comment Share on other sites More sharing options...
JeremyDulac Posted January 23, 2018 Share Posted January 23, 2018 @Sage ok cool, that is a good rule of thumb. Thanks again Quote Link to comment Share on other sites More sharing options...
Sage Posted January 30, 2018 Author Share Posted January 30, 2018 AaronChicago, Adept and Geoff CB 3 Quote Link to comment Share on other sites More sharing options...
IronFilm Posted January 30, 2018 Share Posted January 30, 2018 Oh hey an Arri Alexa Classic using a Nikon lens! :-D Don't see too many photos of that. Quote Link to comment Share on other sites More sharing options...
Sage Posted January 30, 2018 Author Share Posted January 30, 2018 And no monitor ; ) Quote Link to comment Share on other sites More sharing options...
IronFilm Posted January 31, 2018 Share Posted January 31, 2018 True. I only see a power cable connected to it. Nothing hiding over on the operator side?! How come? Quote Link to comment Share on other sites More sharing options...
Sage Posted January 31, 2018 Author Share Posted January 31, 2018 Odds and ends are still arriving, it should be minimally operational by tomorrow (with the card reader) Quote Link to comment Share on other sites More sharing options...
IronFilm Posted February 1, 2018 Share Posted February 1, 2018 Oh nice! So you purchased it? I think you're one of the few on this forum (the only one?!) then who personally owns an Arri Alexa Classic. May I ask what price you got it for? (& what work have you got planned for it) Quote Link to comment Share on other sites More sharing options...
Sage Posted February 1, 2018 Author Share Posted February 1, 2018 Its probably the cheapest working Alexa ever sold, at $7800 for the body only (best offer). With shipping and minimal accessories, there was another 1.5k added on. The seller neglected to mention (or didn't know?) that it had a history of salt water damage (I called Arri about the serial number). What this amounted to is that the SD card slot wasn't working when I received it. I got creative and cleaned the contacts in there, and it worked (the electronics in the cam are water-sealed after all). The upside of this is that it is a very recent model, with only 536 hours on the body. I intend to make a reference quality color conversion for a variety of cameras, with side by sides to document the conversion. And then, I'll probably use it for close ups and 120fps slow motion for a narrative thereafter graphicnatured, Geoff CB and IronFilm 3 Quote Link to comment Share on other sites More sharing options...
Attila Bakos Posted February 1, 2018 Share Posted February 1, 2018 Which display do you use to record patches from? We discussed earlier that you don't want to tell what you do with out-of-gamut colors, but maybe you can tell me if those are simply extrapolated or you use some other kind of sorcery, maybe recording a few values from real life? You can reply in private if that's better. The reason I ask is because I also do conversions the same way you do, with my own software, and the values my monitor can't show are extrapolated, which is always to be taken with a grain of salt. I could use some hint from someone with more experience. I'm no competition btw, if that matters. Quote Link to comment Share on other sites More sharing options...
AaronChicago Posted February 1, 2018 Share Posted February 1, 2018 So I've been doing a ton of testing with VLog L and various conversions, techniques, profiles, etc. I ended up doing a head to head test with the Alexa Soft (Daylight) Rec 709 vs VLogL to V709_100 (Panasonic's default VLog conversion). Using ONLY curves and MAIN saturation slider they look extremely similar. I did no modifications to color channels. Alexa Soft 709: https://imgur.com/a/Uhf5Z Varicam conversion LUT: https://imgur.com/a/kqaDf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.