Media Kat Posted January 13, 2018 Share Posted January 13, 2018 Anyone have any thoughts on the new DJI Ronin-S VS. the Zhiyun Crane V2? I am interested in a gimbal for mirrorless cameras. Thanks. Quote Link to comment Share on other sites More sharing options...
Kisaha Posted January 13, 2018 Share Posted January 13, 2018 The S is not even out yet, and it won't for at least another 5-6 months. Not even pricing is known, only a vague "less than 1000$", which is a lot, if it is around 999$. Quote Link to comment Share on other sites More sharing options...
ntblowz Posted January 14, 2018 Share Posted January 14, 2018 Crane v2 will be 2x cheaper than ronin s Quote Link to comment Share on other sites More sharing options...
Kisaha Posted January 22, 2018 Share Posted January 22, 2018 http://www.zhiyun-tech.com/crane_plus_en/Â there is another one! Quote Link to comment Share on other sites More sharing options...
scotchtape Posted January 22, 2018 Share Posted January 22, 2018 Not sure if this is accurate but this site has pre order pricing... https://omniviewtech.ca/products/ronin-s $1,700 cdn... Which is like $1,300usd Quote Link to comment Share on other sites More sharing options...
JordanWright Posted January 22, 2018 Share Posted January 22, 2018 wow I hope not, thats nearing Ronin prices Quote Link to comment Share on other sites More sharing options...
photographer-at-large Posted May 15, 2018 Share Posted May 15, 2018 DJI Ronin-S will be under $800 according to: Â Â Quote Link to comment Share on other sites More sharing options...
newfoundmass Posted May 15, 2018 Share Posted May 15, 2018 Have you thought about the Moza Air? Quote Link to comment Share on other sites More sharing options...
kye Posted May 16, 2018 Share Posted May 16, 2018 This is a topic I'll be visiting when the BM Pocket 4K comes out as if I buy the Pocket 4K I'll probably also be looking for a gimbal for it to make it my single camera setup. What kind of interest do we anticipate in the Ronin from DoPs / professional steadicam operators?  I would imagine that Zhiyun wouldn't have a great name in industry, but my (outside) impression is that Ronin is a different story? Quote Link to comment Share on other sites More sharing options...
Axel Posted May 16, 2018 Share Posted May 16, 2018 The reviewers all say the Ronin S is definitely quite heavy. Perhaps too heavy. Apart from that, it seems to be too good to be true. Definitely looks absolutely sophisticated and well-thought out. High tech from China. I have the Ronin M. Rarely used because too heavy. Didn't sell it because I wouldn't get enough money back. What is the purpose of a gimbal anyway? To shoot hyperlapses? Don't think so. I have the Zhiyun, er, "one". Very lightweight. Would it hold the Pocket 4k? Needed a baseplate at least (some 20 bucks). And the display is blocked by the roll motor. Needed an external monitor - and have one. With small superclamp to mount it and with smallest NP-F970 accu it adds 230 g. So whether I need the Ronin S remains to be seen. Quote Link to comment Share on other sites More sharing options...
scotchtape Posted May 16, 2018 Share Posted May 16, 2018 "This is heavy" - no weight specs given... The 3 gimbals in this "class" (assuming Ronin-S is similar) would be Ikan Pivot, Tilta G2/G2X and Ronin-S. Ikan and Tilta weigh 4lb and rated for 8lb gear. I'm waiting for the Ronin-S but I might get the Tilta G2X in the meantime. The Pilotfly Adventurer is 2lb / 6lb. The promo vids for the adventurer is full of shakes so not really selling me there (probably user error, but still, the official promo...). Also it requires a custom battery (like the Ronin-S) which I find annoying, and "only" has 6 hour battery life, and is more expensive than the Ikan and Tilta gimbals. I don't know if Tilta's "selfie" mode is actually different than any other gimbal, but you can mount the camera "backwards" to more easily balance longer lenses which is a plus. However you have to activate it using the app, which is kind of dumb that you can't do it right from the gimbal. They all have pros and cons, still on the fence but I do need something bigger. Quote Link to comment Share on other sites More sharing options...
salim Posted May 16, 2018 Share Posted May 16, 2018 I have a Crane v2 (not the heavier Crane 2) and I'll have chance probably this week or next week to test the Ronin-s for myself. I'll try to do a side-by-side comparison. Though they're not exactly comparable, I just to get a feel for usability, etc. Quote Link to comment Share on other sites More sharing options...
scotchtape Posted May 16, 2018 Share Posted May 16, 2018 Crane V2 can handle max 4lbs (weighs 2.4lbs) , meanwhile the Ronin-S can handle at least twice that (probably weighs 4lbs), plus can balance longer lenses and bigger cameras. The G2X can rock C200+Sigma 18-35mm, so Ronin-S should be able to do that if not more (from what they said on the NAB videos). Not that I would want to handle that without a vest... Just ordered a used G2X from BH to tide me over until Ronin-S comes out. Quote Link to comment Share on other sites More sharing options...
newfoundmass Posted May 17, 2018 Share Posted May 17, 2018 Why not the Moza Air? It can hold 7 lbs and has gotten better reviews than the Zhiyun from what I've seen? I got mine on sale from B&H for $399 in April, which was a steal. Quote Link to comment Share on other sites More sharing options...
scotchtape Posted May 17, 2018 Share Posted May 17, 2018 Because the extra weight capacity goes to waste when the back of the gimbal prevents you from balancing longer loads (either heavier and longer lenses or camera bodies). Also the roll motor blocks the screen of cameras with non swing out monitors. Hence a whole bunch of new gimbals with the angled motor.  Try putting c200 on moza air. Quote Link to comment Share on other sites More sharing options...
Stefan Antonescu Posted May 17, 2018 Share Posted May 17, 2018 I think the Ronin-S looks fantastic. It truly feels like the Next-Gen in terms of design and build quality. If DJI can make it reliable with great performance, It will most certainly be the new king of the hill. Quote Link to comment Share on other sites More sharing options...
DBounce Posted May 17, 2018 Share Posted May 17, 2018 6 hours ago, scotchtape said: Because the extra weight capacity goes to waste when the back of the gimbal prevents you from balancing longer loads (either heavier and longer lenses or camera bodies). Also the roll motor blocks the screen of cameras with non swing out monitors. Hence a whole bunch of new gimbals with the angled motor.  Try putting c200 on moza air. Agreed, I intend on getting this gimbal for a c200B that I know will be a great match with it. I don't understand all the reviewers staying how heavy this gimbal is? I held it at NAB and didn’t think it was heavy at all. It felt considerably lighter than the Tilta, which was my second choice. Also the DJI booth was by far my favorite at the show. Super friendly and open to answer any questions on camera.  Quote Link to comment Share on other sites More sharing options...
scotchtape Posted May 17, 2018 Share Posted May 17, 2018 Just have to wait a few more months My only other complaint right now is that the super useful screen is probably going to be an extra chunk of change. Also the other gimbals resale are gonna drop badly  such is life! Quote Link to comment Share on other sites More sharing options...
jhnkng Posted May 22, 2018 Share Posted May 22, 2018 I have the Crane 2 (the bigger one) and I just got the new mechanical focus motor, and it’s a revelation. Being able to pull focus using the Crane 2 wheel without having rig and power a bunch of different stuff is amazing. And they’re selling the gimbal and follow focus together for like 1000 bucks AUD!  Seriously, if you’re in the market for a gimbal you really need to look at the Crane 2. MurtlandPhoto 1 Quote Link to comment Share on other sites More sharing options...
Kisaha Posted May 22, 2018 Share Posted May 22, 2018 3 hours ago, jhnkng said: I have the Crane 2 (the bigger one) and I just got the new mechanical focus motor, and it’s a revelation. Being able to pull focus using the Crane 2 wheel without having rig and power a bunch of different stuff is amazing. And they’re selling the gimbal and follow focus together for like 1000 bucks AUD!  Seriously, if you’re in the market for a gimbal you really need to look at the Crane 2. What camera are you using it with? salim 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.