Turboguard Posted September 11, 2018 Share Posted September 11, 2018 Oh, just saw that 8sin is working on a specific T5 mount. Guess I'll stick around and see what it will look like. seanzzxx 1 Quote Link to comment Share on other sites More sharing options...
mnewxcv Posted September 11, 2018 Share Posted September 11, 2018 45 minutes ago, Turboguard said: Haven't seen much in the released footage. Seems to be almost minimal. What do you guys think about mounting a smartphone clamp to a cage to hold the samsung T5? I'd only use the setup while shooting RAW 4K DCI obviously. Then SD cards for ProRes. Been looking at 8sin's Scorpio half cage. Should work, but I'm sure they will release something more specific once cages come out for this camera. Quote Link to comment Share on other sites More sharing options...
JordanWright Posted September 11, 2018 Share Posted September 11, 2018 I still think CFast sounds like much less effort, i'm going to be picking up 2nd hand CFast cards for cheaper. Quote Link to comment Share on other sites More sharing options...
Snuff Posted September 11, 2018 Share Posted September 11, 2018 AlexTrinder96 1 Quote Link to comment Share on other sites More sharing options...
mnewxcv Posted September 11, 2018 Share Posted September 11, 2018 So the 1080p on this camera is just cropped in to the sensor read out of 1920x1080 correct? As in, the only advantage of shooting 1080 is if I need to send a 1080p file without editing? Since I could get 1080 cropped from the 4k footage in editing? Quote Link to comment Share on other sites More sharing options...
seanzzxx Posted September 11, 2018 Share Posted September 11, 2018 In raw - yes. In prores it is downsampled 1080p (meaning you get the full sensor width), unless you're shooting 120fps in which case it will be a 2x crop again. mnewxcv 1 Quote Link to comment Share on other sites More sharing options...
mechanicalEYE Posted September 11, 2018 Share Posted September 11, 2018 16 minutes ago, Turboguard said: Oh, just saw that 8sin is working on a specific T5 mount. Guess I'll stick around and see what it will look like. They say it will be on the site soon for pre-orders. Mmmbeats, jonpais and AlexTrinder96 3 Quote Link to comment Share on other sites More sharing options...
AlexTrinder96 Posted September 11, 2018 Share Posted September 11, 2018 11 minutes ago, Snuff said: looks really nice, shame it's so expensive ! Quote Link to comment Share on other sites More sharing options...
Anaconda_ Posted September 11, 2018 Share Posted September 11, 2018 2x crop of the sensor, which is already 2x crop of full frame (give or take) so 120fps is 4x crop compared to ff. And yeah, epoxy a little shoe into one side of the drive. A dedicated, pre-made mount by any company will cost more than it needs to that's for sure. I think the shoe mount idea will look a little slicker too, and be just as secure. You could even mount it to the bottom of the cam for handheld shots. Quote Link to comment Share on other sites More sharing options...
Dunjoye Posted September 11, 2018 Share Posted September 11, 2018 17 minutes ago, mechanicalEYE said: They say it will be on the site soon for pre-orders. Nice. I like this . ........... By the way, the rant in the last few pages regarding BMD is beyond embarrassing. SR 1 Quote Link to comment Share on other sites More sharing options...
Anaconda_ Posted September 11, 2018 Share Posted September 11, 2018 So don't bring it up. Weird how in that sample pic, the USB is going the wrong way to the port. I'd definitely make it go the shortest route and tie up any slack. Emanuel 1 Quote Link to comment Share on other sites More sharing options...
greggreenhaw Posted September 11, 2018 Share Posted September 11, 2018 I like the 8sin cage but i recommend this top handle/rail system Having top rails is really import for lens controls specially on smaller rigs when the grips and matte box can get in the way https://www.smallrig.com/smallrig-closed-top-handle-for-fs7-fs7ii-fs5-ursa-mini-1979.html Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted September 11, 2018 Super Members Share Posted September 11, 2018 The extendible phone mounts would work as well and give you a movable ball mount on the hotshoe. They also have tripod mounts so you can attach them to a mounting point on a cage etc. They are all over Amazon and eBay for a few quid. Quote Link to comment Share on other sites More sharing options...
mnewxcv Posted September 11, 2018 Share Posted September 11, 2018 16 minutes ago, Anaconda_ said: So don't bring it up. Weird how in that sample pic, the USB is going the wrong way to the port. I'd definitely make it go the shortest route and tie up any slack. Don't worry, I take full responsibility for getting us back on track ? I do quite like that cage. Perhaps there is a channel for the cable to be kept out of the way rather than twist tied on the left. Quote Link to comment Share on other sites More sharing options...
SR Posted September 11, 2018 Share Posted September 11, 2018 8sin looks awesome. Afraid I prematurely got myself this on Amazon (just 10 bucks). Quote Link to comment Share on other sites More sharing options...
IronFilm Posted September 11, 2018 Share Posted September 11, 2018 I need something like this but with a clamp on the bottom so I can attached my iPod Touch (which uses an iOS app with the F8n) to the frame of my Orca OR30 mixing bag. Quote Link to comment Share on other sites More sharing options...
Administrators Andrew Reid Posted September 11, 2018 Administrators Share Posted September 11, 2018 54 minutes ago, mechanicalEYE said: This is something I hope we see on a lot more cameras in 2019. I find the external battery and bulk of an Atomos recorder very cumbersome for most shoots and an additional burden to worry about.... Is the cable loose, is it recording, is it setup right, is the battery going to see me through the next take, blah blah blah. With the T5 you just plug it in. Done. Love that it takes power from the USB C port, no other 4K recorders do that. As we already have a plenty large enough screen on the camera, the need for an external monitor / recorder is even less. I will be asking every manufacturer at Photokina about adding USB C raw recording and seeing what they think of it. Quote Link to comment Share on other sites More sharing options...
Hans Punk Posted September 11, 2018 Share Posted September 11, 2018 53 minutes ago, mechanicalEYE said: They say it will be on the site soon for pre-orders. Now if someone could combine the T5 enclosure with a nice high res 3 inch OLED display (to use with a loupe finder) - that would make a rather nice eyepiece/recorder combo. Quote Link to comment Share on other sites More sharing options...
Anaconda_ Posted September 11, 2018 Share Posted September 11, 2018 @BTM_Pix could combine his cheap screen and a raspberry pie case and create exactly that. You'd still need 2 cables though as the USB doesn't give a video signal. Good shout @Andrew Reid , wouldn't the camera manufacture have to create their own raw format? Or adopt Prores raw? The USB drive essentially copies the file being created in the camera in real time right? Also, but I don't think atomos will be too happy about it. haha Quote Link to comment Share on other sites More sharing options...
Administrators Andrew Reid Posted September 11, 2018 Administrators Share Posted September 11, 2018 I believe Cinema DNG is an open raw format that anyone can use. So no they don't have to create their own format or adopt ProRes raw. The USB C interface is very versatile, you can send all sorts over it. In this case just a data transfer in realtime like a PC, containing the raw picture data, not sure of the format on the Pocket 4K. It is something I am pretty sure you will see on more cameras soon after the Pocket 4K comes out. Reliable 4K RAW recording on a mirrorless camera, as easy as plugging in a USB SSD drive. 12 minutes ago, Hans Punk said: Now if someone could combine the T5 enclosure with a nice high res 3 inch OLED display (to use with a loupe finder) - that would make a rather nice eyepiece/recorder combo. That would be nice. A smartphone with USB C and OLED is essentially the same thing (SSD chipset, processor and screen) and I am surprised a monitor company hasn't taken one as the basis to create an external recorder from. If they have USB C transfer and live-preview, along with the nice long battery life of a modern smartphone (in airplane mode), you will have a screen which is slimmer, lighter and downright better than everything else on the market for people who want to keep the size down. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.