PatrickV Posted February 28, 2012 Share Posted February 28, 2012 Hi there, I downloaded the newest firmware for my GH2. I tried copying the .bin file into my (formatted) SDcard but it didnt work. I am getting an writing protection error. Somebody know how to fix this? Thanks in adance! Quote Link to comment Share on other sites More sharing options...
Administrators Andrew Reid Posted February 28, 2012 Administrators Share Posted February 28, 2012 Slide the very small tab at the side of the SD card in the opposite direction and make sure it stays there :) Quote Link to comment Share on other sites More sharing options...
PatrickV Posted February 28, 2012 Author Share Posted February 28, 2012 Hi Andrew, U mean the small grey tab, right? I switched it to the opposite of 'Lock' but i still get the same error. Quote Link to comment Share on other sites More sharing options...
PatrickV Posted March 1, 2012 Author Share Posted March 1, 2012 Does anyone know this solution? Quote Link to comment Share on other sites More sharing options...
crashandannie Posted March 1, 2012 Share Posted March 1, 2012 It is likely that the second part of Andrew's reply is the important one: "make sure it stays there" Some cards have a loose lock button that will slide as you insert or remove it from the camera or cardreader. Since it slides back after you remove it, it looks OK but isn't really. Try using a small piece of tape or your finger to lock it down and be extra careful as you slide it into place. Hope this helps! Quote Link to comment Share on other sites More sharing options...
PatrickV Posted March 1, 2012 Author Share Posted March 1, 2012 Is it an option to connect my GH2 directly to my computer? And then just copy the bin file? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.