BrunoCH Posted February 18, 2019 Share Posted February 18, 2019 31 minutes ago, thephoenix said: Which is why i added with adapters to 2.5 ; ) Same answer as to brunoch Should work with 3.5 to 2.5 adapters Good luck !!! I think a better solution would be to ask Fuji and Tilta what are connexions in their remote cable and to make a custom. Quote Link to comment Share on other sites More sharing options...
thephoenix Posted February 18, 2019 Share Posted February 18, 2019 1 minute ago, BrunoCH said: Good luck !!! I think a better solution would be to ask Fuji and Tilta what are connexions in their remote cable and to make a custom. By the time i will get answer i think i will have a new camera Weird i can only find 4 poles 3.5 to 2.5 adapters that are small. No 3 poles I could do one yes but i am afraid the welding will not last in time Wiring i can find on the web Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted February 18, 2019 Super Members Share Posted February 18, 2019 9 minutes ago, thephoenix said: By the time i will get answer i think i will have a new camera Weird i can only find 4 poles 3.5 to 2.5 adapters that are small. No 3 poles I could do one yes but i am afraid the welding will not last in time Wiring i can find on the web If you have to do something custom and are concerned about doing the soldering (especially when trying to work out the connections) then these solderless terminal connectors are useful You would then buy a 4 pole to 4 pole 2.5mm cable, cut the cable in half, strip the wires and put them into the terminals to make the connections. https://www.amazon.co.uk/kwmobile-2-5mm-Balun-Converter-Adapter-Black/dp/B07NDGYSGB/ref=sr_1_3?ie=UTF8&qid=1550527647&sr=8-3&keywords=2.5mm+balun+converter As you get two terminal adapters in the pack and you've cut your 4 pole cable in half you will then be able to make up 2 of the correct cables. Once you've established what the connections are then you can have someone make up something more permanent. Or just gaffa tape the hell out of the lashed up ones BrunoCH and thephoenix 1 1 Quote Link to comment Share on other sites More sharing options...
BrunoCH Posted February 18, 2019 Share Posted February 18, 2019 23 minutes ago, thephoenix said: By the time i will get answer i think i will have a new camera Weird i can only find 4 poles 3.5 to 2.5 adapters that are small. No 3 poles I could do one yes but i am afraid the welding will not last in time Wiring i can find on the web The cable LANC1 on the tilta site should work (for sony FS5 and FS7) https://tilta.com/shop/nucleus-nano-run-stop-cables/ See the screen capture on the documentation on FS7 : 3poles same as XT3 thephoenix 1 Quote Link to comment Share on other sites More sharing options...
androidlad Posted February 18, 2019 Share Posted February 18, 2019 Fuji 2.5mm remote release pin out- Quote Link to comment Share on other sites More sharing options...
thephoenix Posted February 19, 2019 Share Posted February 19, 2019 7 hours ago, BrunoCH said: The cable LANC1 on the tilta site should work (for sony FS5 and FS7) https://tilta.com/shop/nucleus-nano-run-stop-cables/ See the screen capture on the documentation on FS7 : 3poles same as XT3 good find thanks, will look into it, probably will ask tilta about it. Quote Link to comment Share on other sites More sharing options...
thephoenix Posted February 19, 2019 Share Posted February 19, 2019 found this too but seems to be 3.5 to 2.5 https://www.bhphotovideo.com/c/product/1325912-REG/pixio_pixcable01a_additional_lance_cable_for.html Quote Link to comment Share on other sites More sharing options...
thephoenix Posted February 19, 2019 Share Posted February 19, 2019 got an answer from tilta, seems like they are working on supporting the xt3 as they had many requests about it also asked if the lanc1 cable could work with the xt3, maybe will get an answer; free to ask Quote Link to comment Share on other sites More sharing options...
MeanRevert Posted February 19, 2019 Share Posted February 19, 2019 Hey guys, sorry if breaking up the flow of this thread but Just asking again.. Does the remote app allow touch focus? Also, if I were to record in flog, are there LUTs to convert to the fuji profiles like Eterna, Astia, Classic Chrome, etc.? Quote Link to comment Share on other sites More sharing options...
thebrothersthre3 Posted February 19, 2019 Share Posted February 19, 2019 17 minutes ago, MeanRevert said: Hey guys, sorry if breaking up the flow of this thread but Just asking again.. Does the remote app allow touch focus? Also, if I were to record in flog, are there LUTs to convert to the fuji profiles like Eterna, Astia, Classic Chrome, etc.? Fuji has an official Eterna Lut, but none for the other color profiles unfortunately. They also have a Wide Dynamic range LUT. Quote Link to comment Share on other sites More sharing options...
DanielVranic Posted February 19, 2019 Share Posted February 19, 2019 20 minutes ago, MeanRevert said: Hey guys, sorry if breaking up the flow of this thread but Just asking again.. Does the remote app allow touch focus? Also, if I were to record in flog, are there LUTs to convert to the fuji profiles like Eterna, Astia, Classic Chrome, etc.? The LUT's that Fuji provide are pretty bad fyi. Much much better off doing a Color Space Transform and manual curves. Quote Link to comment Share on other sites More sharing options...
thebrothersthre3 Posted February 19, 2019 Share Posted February 19, 2019 20 minutes ago, DanielVranic said: The LUT's that Fuji provide are pretty bad fyi. Much much better off doing a Color Space Transform and manual curves. What do you dislike about the Fuji luts? Quote Link to comment Share on other sites More sharing options...
MeanRevert Posted February 19, 2019 Share Posted February 19, 2019 Ah, that's a bummer. I guess the best thing to do is to just capture it using whatever color profile I ultimately want then. Thanks again. Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted February 19, 2019 Super Members Share Posted February 19, 2019 39 minutes ago, MeanRevert said: Does the remote app allow touch focus? Yes it does but be aware that when you are using app control of a Fuji camera then the camera itself is limited to only being able to record at 720p resolution. Quote Link to comment Share on other sites More sharing options...
MeanRevert Posted February 20, 2019 Share Posted February 20, 2019 Ah, that's a pretty big caveat. Thanks for the heads up. Looks like an external monitor is in the bag now. A shame that it's not fully articulating. Quote Link to comment Share on other sites More sharing options...
KnightsFan Posted February 20, 2019 Share Posted February 20, 2019 2 hours ago, DanielVranic said: The LUT's that Fuji provide are pretty bad fyi. Much much better off doing a Color Space Transform and manual curves. Wait does Resolve support Flog as an input space now? Quote Link to comment Share on other sites More sharing options...
Carz Posted February 20, 2019 Share Posted February 20, 2019 Does fuji offer a similar feature to clear image zoom? and is that something that could be added in firmware? I find this a very useful feature in sony and panasonic cameras. Quote Link to comment Share on other sites More sharing options...
androidlad Posted February 20, 2019 Share Posted February 20, 2019 6 hours ago, BTM_Pix said: Yes it does but be aware that when you are using app control of a Fuji camera then the camera itself is limited to only being able to record at 720p resolution. WIth X-T3, the app records in 1080p. And there's an upcoming update for the app, maybe things could change. 7 hours ago, MeanRevert said: Hey guys, sorry if breaking up the flow of this thread but Just asking again.. Does the remote app allow touch focus? Also, if I were to record in flog, are there LUTs to convert to the fuji profiles like Eterna, Astia, Classic Chrome, etc.? Fuji only has Eterna LUT, BT.709 LUT and a pure gamut transform LUT. The rest of the film sims, you'll have to use non-official ones. 6 hours ago, DanielVranic said: The LUT's that Fuji provide are pretty bad fyi. Much much better off doing a Color Space Transform and manual curves. They aren't bad, they are standard transforms. The BT.709 WDR one is useful when a neutral image is required. Resolve's CST does not offer any roll-off so sometimes it may look harsh. Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted February 20, 2019 Super Members Share Posted February 20, 2019 1 hour ago, androidlad said: WIth X-T3, the app records in 1080p. Ah. Thanks Quote Link to comment Share on other sites More sharing options...
ErisC Posted February 20, 2019 Share Posted February 20, 2019 Hi all, do you know why the h.265(HEVC) is darker than h.264 on the X-T3? In the Display / Viewfinder of the camera are the same, but on the monitor of my Mac I see the h.265 darker, more contrasted than h.264 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.