Attila Bakos Posted February 13, 2019 Share Posted February 13, 2019 1 hour ago, BrunoCH said: Yes the waweform has three options : Luma, RGB, parade. swit 55 parade.mov Great, thanks! Quote Link to comment Share on other sites More sharing options...
Adam Kuźniar Posted February 21, 2019 Share Posted February 21, 2019 @BrunoCH @androidlad I just got the monitor and I've noticed something - does your tilt arm also has a little wiggle/play in the coldshoe of the camera? I screw it in all the way and it's not sliding but it seems like the metal part is smaller than the coldshoe so it's able to wiggle around in there, left and right. Quote Link to comment Share on other sites More sharing options...
BrunoCH Posted February 21, 2019 Author Share Posted February 21, 2019 27 minutes ago, Adam Kuźniar said: @BrunoCH @androidlad I just got the monitor and I've noticed something - does your tilt arm also has a little wiggle/play in the coldshoe of the camera? I screw it in all the way and it's not sliding but it seems like the metal part is smaller than the coldshoe so it's able to wiggle around in there, left and right. Yes it's the same for mine. But I don't use it because the miniUSB connection is on the side of this tilt arm and I power the monitor by usb with an Anker 26000. Quote Link to comment Share on other sites More sharing options...
persol Posted March 31, 2019 Share Posted March 31, 2019 I tried everything mentioned here to get the LUTs onto my SWIT CM55-C but no success. It always says "No Device" after choosing "Load LUT File -> User LUT". I tried formatting the card on my mac and also in the X-T3 camera, also different LUTs. Any more ideas? Quote Link to comment Share on other sites More sharing options...
BrunoCH Posted April 1, 2019 Author Share Posted April 1, 2019 2 hours ago, persol said: I tried everything mentioned here to get the LUTs onto my SWIT CM55-C but no success. It always says "No Device" after choosing "Load LUT File -> User LUT". I tried formatting the card on my mac and also in the X-T3 camera, also different LUTs. Any more ideas? It seems that the swit only accepts 3x17 LUTs on a FAT 32 card. I think the recent Macs and the Xt3 format the cards in FAT 64. I got the success with a card formatted on my old nikon D5200 (I am sure it’s FAT 32 on this camera) Quote Link to comment Share on other sites More sharing options...
Adam Kuźniar Posted April 1, 2019 Share Posted April 1, 2019 7 hours ago, BrunoCH said: It seems that the swit only accepts 3x17 LUTs on a FAT 32 card. I think the recent Macs and the Xt3 format the cards in FAT 64. I got the success with a card formatted on my old nikon D5200 (I am sure it’s FAT 32 on this camera) This is true. Fat32 and use some kind of LUT Calculator or converted to get your luts to 3x17 Quote Link to comment Share on other sites More sharing options...
Thpriest Posted April 1, 2019 Share Posted April 1, 2019 What's the monitor like for focussing? I bright light (with sunhood)? I'd be using it with a GH5 in 4k (50p and 25p 10bit). I want something better than the EVF Quote Link to comment Share on other sites More sharing options...
Adam Kuźniar Posted April 1, 2019 Share Posted April 1, 2019 18 minutes ago, Thpriest said: What's the monitor like for focussing? I bright light (with sunhood)? I'd be using it with a GH5 in 4k (50p and 25p 10bit). I want something better than the EVF That was the main reason I bought it - just having a 5 inch screen up in the face makes focusing a breeze. I shoot a lot with the Sigma 18-35 at f/1.4 and the percentage of missed focus came down a lot after I started using this monitor. It also has peaking and all the assists + you can zoom in the picture during recording which comes in clutch if you're shooting an interview for example and just want to double triple check the focus after you already started recording. Thpriest and UncleBobsPhotography 2 Quote Link to comment Share on other sites More sharing options...
androidlad Posted April 15, 2019 Share Posted April 15, 2019 @BrunoCH New firmware for CM-55C released. Copy these two files to the root directory in a FAT32 formatted SD card, turn on unit and follow instructions. JTH5501_UN108v01.bin JTH5500_UN108v01.bin Quote Link to comment Share on other sites More sharing options...
Attila Bakos Posted April 15, 2019 Share Posted April 15, 2019 Is there a changelog somewhere? Quote Link to comment Share on other sites More sharing options...
BrunoCH Posted April 15, 2019 Author Share Posted April 15, 2019 5 hours ago, androidlad said: @BrunoCH New firmware for CM-55C released. Copy these two files to the root directory in a FAT32 formatted SD card, turn on unit and follow instructions. JTH5501_UN108v01.bin 8 MB · 0 downloads JTH5500_UN108v01.bin 3.08 MB · 0 downloads Thank you very much for that. Unfortunately I’m not at home and I can’t update until April 23rd (I just have an ipad with me). I hope the download links will still be valid. Quote Link to comment Share on other sites More sharing options...
androidlad Posted April 16, 2019 Share Posted April 16, 2019 17 hours ago, Attila Bakos said: Is there a changelog somewhere? 1. Signal format displays 59.94 instead of 60. 2. Default color temperature changed to “Native” 3. Signal format display and battery info display can be individually turned on/off. 4. User LUT supports 33x33x33 format upload 5. Add “Saturation” adjustment in calibration menu. 6. Fixed other bugs. Tool: SD card, FAT32 Quote Link to comment Share on other sites More sharing options...
Adam Kuźniar Posted April 16, 2019 Share Posted April 16, 2019 6 hours ago, androidlad said: 1. Signal format displays 59.94 instead of 60. 2. Default color temperature changed to “Native” 3. Signal format display and battery info display can be individually turned on/off. 4. User LUT supports 33x33x33 format upload 5. Add “Saturation” adjustment in calibration menu. 6. Fixed other bugs. Tool: SD card, FAT32 Thank you so much! Where did you get it from? Quote Link to comment Share on other sites More sharing options...
BrunoCH Posted April 26, 2019 Author Share Posted April 26, 2019 On 4/15/2019 at 2:29 PM, androidlad said: @BrunoCH New firmware for CM-55C released. Copy these two files to the root directory in a FAT32 formatted SD card, turn on unit and follow instructions. JTH5501_UN108v01.bin 8 MB · 4 downloads JTH5500_UN108v01.bin 3.08 MB · 5 downloads Done! Thanks! Quote Link to comment Share on other sites More sharing options...
giorgos Posted April 28, 2019 Share Posted April 28, 2019 Since the firmware update I have an "error" white screen almost a every time I use the monitor, and I have to reboot it in order to use it again. Does anyone else have the same problem? Quote Link to comment Share on other sites More sharing options...
billdoubleu Posted April 30, 2019 Share Posted April 30, 2019 On 1/23/2019 at 4:28 AM, Adam Kuźniar said: a bit off topic but how is the monitor in general? Anything you specifically like or dislike about it? I'm looking into a affordable monitor for my G80 and the main reason why I want to pick this one up is for LUT monitoring @Adam Kuźniar Do you see any significant lag/ latency with the G80 and this monitor? Quote Link to comment Share on other sites More sharing options...
Adam Kuźniar Posted April 30, 2019 Share Posted April 30, 2019 On 4/28/2019 at 8:09 PM, giorgos said: Since the firmware update I have an "error" white screen almost a every time I use the monitor, and I have to reboot it in order to use it again. Does anyone else have the same problem? This is exactly why I haven't installed it, it's not on their website, it's some file some guy uploaded and he didn't even answer my question about where he got it from. Shady 3 hours ago, billdoubleu said: @Adam Kuźniar Do you see any significant lag/ latency with the G80 and this monitor? I did and it's definitely there but I almost never notice it when actually shooting. Last sunday I shot a small concert and then it was noticeable, because I could hear the drums hit before I could see them, but again, it didn't bother me that much. You can check out my review if you want to see what the delay is billdoubleu 1 Quote Link to comment Share on other sites More sharing options...
giorgos Posted April 30, 2019 Share Posted April 30, 2019 There is a fix if anyone else installed the "latest" firmware and notices errors. I contacted Swit and, after asking me where did I find the latest firmware, they sent me a file to downgrade the firmware which is the second file @androidlad had attached in his post JTH5500_UN108v01.bin Quote Link to comment Share on other sites More sharing options...
androidlad Posted April 30, 2019 Share Posted April 30, 2019 36 minutes ago, giorgos said: There is a fix if anyone else installed the "latest" firmware and notices errors. I contacted Swit and, after asking me where did I find the latest firmware, they sent me a file to downgrade the firmware which is the second file @androidlad had attached in his post JTH5500_UN108v01.bin 3.12 MB · 0 downloads No errors so far. Did you follow the instructions? The new firmware has been released on Swit website: http://www.swit.cc/CM-55C-firmware.aspx Quote Link to comment Share on other sites More sharing options...
Oliver Daniel Posted April 30, 2019 Share Posted April 30, 2019 Is there any way to adjust the color of the display? I've got one and the color is quite a lot warmer than what the camera LCD is seeing. Also the highlights seem a lot brighter and steeper than the camera monitor, makes it hard to judge the image. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.