Super Members BTM_Pix Posted October 11, 2019 Super Members Share Posted October 11, 2019 25 minutes ago, Brian Williams said: We’re saying (and I just looked at the spec sheet too), it is indeed a 1.5x crop for all video modes, yeah? I can't speak for anybody else but I'm certainly not saying that. The "Crop" reference is in the stills section, not the Movie Recording section. The figures in brackets after each primary resolution such as this : Are indicating what the resolution will be in crop mode if use an APS-C lens (which Sigma refer to as DC lenses for their own brand) hence this indicator at the top of the listings. An unfortunate translation with "DC Clop Mode" as it should of course read "DC Crop Mode". If you look at the spec for their SD Quattro H, they illustrate this a bit more clearly as its on a separate tab but if you open both you will see the same process, albeit with a smaller reduction as it is not being based on a FF sensor as the SD Quattro H is an APS-H. mercer 1 Quote Link to comment Share on other sites More sharing options...
Brian Williams Posted October 11, 2019 Share Posted October 11, 2019 42 minutes ago, BTM_Pix said: The "Crop" reference is in the stills section, not the Movie Recording section. The figures in brackets after each primary resolution such as this : Are indicating what the resolution will be in crop mode if use an APS-C lens (which Sigma refer to as DC lenses for their own brand) hence this indicator at the top of the listings. I guess, and yeah I saw that the crop mention was in the stills section, but their shit is all over the place so I don't necessarily trust their copywriters. It still doesn't really make sense to me though, because a 1.5x crop on 6,000x4,000 isn't 3840x2560 for stills. Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted October 11, 2019 Super Members Share Posted October 11, 2019 1 hour ago, Brian Williams said: I guess, and yeah I saw that the crop mention was in the stills section, but their shit is all over the place so I don't necessarily trust their copywriters. It still doesn't really make sense to me though, because a 1.5x crop on 6,000x4,000 isn't 3840x2560 for stills. They refer to it on the spec sheet as "approx. 1.5 times". It caused enough confusion at the announcement that I would have thought they'd have clarified it in a new sheet but they've even left the "clop" part of it on so I guess not! Quote Link to comment Share on other sites More sharing options...
Trek of Joy Posted October 11, 2019 Share Posted October 11, 2019 16 hours ago, Brian Williams said: Might as well hit buy and cancel next week if footage comes out and looks bad, that’s my plan at least, wanted to get in line early last night. I've thought about that, but I'll wait for some comprehensive tests first as I don't think it'll be sold out for 6 months like the P4k. I mostly shoot handheld, so RS is a big concern. Plus I get the feeling - much like Blackmagic cameras or the ghosting in the S1's - once its in the hands of many some warts will surface that will create issues. I'd rather wait to see how everything shakes out first rather than be a beta tester. Chris Quote Link to comment Share on other sites More sharing options...
Brian Williams Posted October 12, 2019 Share Posted October 12, 2019 Camera showed up early! ? Feels good in hand jase, Vision, KnightsFan and 4 others 3 4 Quote Link to comment Share on other sites More sharing options...
paulinventome Posted October 12, 2019 Share Posted October 12, 2019 I see nothing to suggest that this is recording movies off anything other than a centre crop. I don't see pixel binning working on a 3:2 6K sensor in any way that would make sense. I'm 99.9% that the movies are all centre crop. I didn't read that about stills, i'd have assumed they were full RAW, 14bit. Also there's no mention of whether the data in the RAW is linear or log based - 8bit linear would be utterly useless and others have pointed out banding in the movies which originally would have thought it was compression based but maybe not. So 8bit linear is pointless, in fact only 12bit linear starts getting into the realm of normal. Some clarification from Sigma would be useful, but i guess we don't have to wait that long. I really want to like this! cheers Paul Brian Williams 1 Quote Link to comment Share on other sites More sharing options...
Martin Kuipers Posted October 12, 2019 Share Posted October 12, 2019 I am so excited for this camera. Realy like the concept of the hybrid camer re-imagened. Also a big plus that is doesnt need a external recorder, but goes directly to a ssd for its DNG recording. This way I can see a small m2 ssd enclosure (like the tilta bmpcc 4k mod) snugly against the side becoming a big hit. Had it in my hands at IBC and its not as imbalanced as I first thought. However, the loupe is not usable as an evf alternative for me. Quote Link to comment Share on other sites More sharing options...
Lars Steenhoff Posted October 12, 2019 Share Posted October 12, 2019 2 hours ago, Martin Kuipers said: I am so excited for this camera. Realy like the concept of the hybrid camer re-imagened. Also a big plus that is doesnt need a external recorder, but goes directly to a ssd for its DNG recording. This way I can see a small m2 ssd enclosure (like the tilta bmpcc 4k mod) snugly against the side becoming a big hit. Had it in my hands at IBC and its not as imbalanced as I first thought. However, the loupe is not usable as an evf alternative for me. Why is the loupe not usable compared to evf? It worked wel when I tried it. It does give an extra point of contact when handheld and its pretty decent optically Quote Link to comment Share on other sites More sharing options...
Martin Kuipers Posted October 12, 2019 Share Posted October 12, 2019 1 hour ago, Lars Steenhoff said: Why is the loupe not usable compared to evf? It worked wel when I tried it. It does give an extra point of contact when handheld and its pretty decent optically Personaly I found the quality of the loupe-lens a bit disapointing. And it made the ergonomics a little strange to handle (buttons ect) Quote Link to comment Share on other sites More sharing options...
Lars Steenhoff Posted October 12, 2019 Share Posted October 12, 2019 http://www2nd.sigma-photo.co.jp/downloads/manual/fp_Manual_en.pdf The Manual Jerome Chiu, tomastancredi and Brian Williams 2 1 Quote Link to comment Share on other sites More sharing options...
Lars Steenhoff Posted October 12, 2019 Share Posted October 12, 2019 It seems like you can manually switch between crop and full frame. We will see if they downsample the raw. ( you can downsample raw, just downsample each channel separate ) or if they use some form of binning Quote Link to comment Share on other sites More sharing options...
nathlas Posted October 14, 2019 Share Posted October 14, 2019 Quote Link to comment Share on other sites More sharing options...
Brian Williams Posted October 14, 2019 Share Posted October 14, 2019 Getting kind of annoying that, still, no one has any hands on experience or footage to show of this thing. Starting to think that me having 3D prints to hold, actually makes me more of an authority on this thing than anyone else, which is sad. Quote Link to comment Share on other sites More sharing options...
Lars Steenhoff Posted October 14, 2019 Share Posted October 14, 2019 I have held the camera in different configurations, with loupe, just the body, body with the side grip, body with a grip at the bottom, body with sigma 45 f2.8 and side grip ( my favorite combination No footage But the ergonomics are good enough for my use Quote Link to comment Share on other sites More sharing options...
majoraxis Posted October 14, 2019 Share Posted October 14, 2019 Looking forward to some comparisons between other full frame RAW cinema camera and the FP. Hopefully the dynamic range will be 13.5 stops or greater. The price is right for sure. Quote Link to comment Share on other sites More sharing options...
Kisaha Posted October 14, 2019 Share Posted October 14, 2019 Great video tool, but I would like to know how competitive it is as a photo camera. I am very happy with my NX cameras as hybrids(that 16-50mm 2-2.8f is still unbeatable on any mount) and the P4K as dedicated (b)raw machine. Wouldn't mind to move on a full frame mount on a year or two. Quote Link to comment Share on other sites More sharing options...
Brian Williams Posted October 14, 2019 Share Posted October 14, 2019 I get the feeling that no one has been allowed to shoot with it yet. I figured all the hands-on reviews would drop the day preorders opened, but it’s been silent. Maybe they’re still working on the firmware, but I don’t know, seems suspect. Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted October 14, 2019 Super Members Share Posted October 14, 2019 22 minutes ago, Kisaha said: Great video tool, but I would like to know how competitive it is as a photo camera. Lack of EVF and mechanical shutter won't do it any favours and no wifi/bluetooth connectivity will be a drawback. Set against that from my own personal point of view though is that, as with the Leica T/CL, the L mount cameras are great platforms for M lenses. With offerings from Voigtlander and particularly 7Artisans offering fast and compact M mount lenses, the FP will make a great combination as the overall form factor will be smaller even than the diminutive Leica CL despite it being full frame versus APS-C. Kisaha and Otago 2 Quote Link to comment Share on other sites More sharing options...
Brian Williams Posted October 14, 2019 Share Posted October 14, 2019 44 minutes ago, BTM_Pix said: Lack of EVF and mechanical shutter won't do it any favours and no wifi/bluetooth connectivity will be a drawback. And don’t forget the potentially crappy focus it may have with that contrast-based system they’re keeping around. Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted October 14, 2019 Super Members Share Posted October 14, 2019 23 minutes ago, Brian Williams said: And don’t forget the potentially crappy focus it may have with that contrast-based system they’re keeping around. As I say, for what I would be using it for, the AF performance would be moot for me - at least until more affordable L mount lenses show up - but yes I would be hoping that Sigma will have moved it on performance wise from the SD Quattro ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.