androidlad Posted January 27, 2020 Share Posted January 27, 2020 1 hour ago, Mark Romero 2 said: Just so I understand though, the X-T3 currently downsamples in-camera to 4k though (from the 5.26K 60p), right??? Will the X-T4 still downsample in camera to 4K from 5.26K? Or will it actually have a 5.26K file? 4K supersampled from 6K/5K and 6K encoded as 6144x4096, 6144x3240, 6144x2592, 5760x3240 Quote Link to comment Share on other sites More sharing options...
bsalisbury Posted January 27, 2020 Share Posted January 27, 2020 androidlad I appreciate the technical knowledge you bring to the discussion board. That said, is there a technical reason the senor likely to be used on the X-T4 (which is the same I believe on the X-T3) cannot deliver us better subject/object tracking in continuous autofocus? Eye focus is great but somewhat limiting. I have not seen this discussed on this site unless I have missed it. Quote Link to comment Share on other sites More sharing options...
androidlad Posted January 27, 2020 Share Posted January 27, 2020 36 minutes ago, bsalisbury said: androidlad I appreciate the technical knowledge you bring to the discussion board. That said, is there a technical reason the senor likely to be used on the X-T4 (which is the same I believe on the X-T3) cannot deliver us better subject/object tracking in continuous autofocus? Eye focus is great but somewhat limiting. I have not seen this discussed on this site unless I have missed it. Better in what sense? There's a firmware update for X-T3 coming in literally two days to significantly improve C-AF and face/eye detection. It's behind Sony's A6600/6400 mainly due to algorithm, it's very little to do with the sensor. Quote Link to comment Share on other sites More sharing options...
bsalisbury Posted January 27, 2020 Share Posted January 27, 2020 Thanks for your quick response. I thought I had seen videos with some mirrorless cameras showing an ability to track a person once they had been selected via touch on the screen so they could be followed even when the eyes could not be tracked. Maybe it was a dream:) Quote Link to comment Share on other sites More sharing options...
BrunoCH Posted January 27, 2020 Share Posted January 27, 2020 1 hour ago, androidlad said: 4K supersampled from 6K/5K and 6K encoded as 6144x4096, 6144x3240, 6144x2592, 5760x3240 I hope these new 6k will be in H265 10bits All-I around 500 Mbps. IronFilm 1 Quote Link to comment Share on other sites More sharing options...
persol Posted January 27, 2020 Share Posted January 27, 2020 I would love to see a "Pro" codec like ProRes. One can dream. 😄 Quote Link to comment Share on other sites More sharing options...
TheDingo Posted January 27, 2020 Share Posted January 27, 2020 Will it have recording time limits like the X-T3 has ??? Quote Link to comment Share on other sites More sharing options...
Brian Williams Posted January 27, 2020 Share Posted January 27, 2020 On 1/26/2020 at 9:34 AM, androidlad said: Expect: Improved IBIS mechanism Any IBIS would be an improvement over non-IBIS X-T3. Amazeballs and IronFilm 2 Quote Link to comment Share on other sites More sharing options...
IronFilm Posted January 27, 2020 Share Posted January 27, 2020 6 hours ago, photographer-at-large said: what about for anamorphic? That is what open gate is for. 4 hours ago, Márcio Kabke Pinheiro said: Only in the XT-3 / XH1, no? In the smaller bodies (XT-30 / XT-200) the cap is 10 minutes in 4k in the XT-30 and 15 mins in the XT-200 (just now noticed that the smaller one have 5 mins more!). Fuji probably would put a cap in a X-E4 too. Ouch, I knew X-T30 had a lower limit, didn't realize it was as low as only ten minutes!! Why Fuji why Fuji??? Protecting X-T3 sales. Quote Link to comment Share on other sites More sharing options...
IronFilm Posted January 27, 2020 Share Posted January 27, 2020 4 hours ago, Márcio Kabke Pinheiro said: Just waiting to Fuji put IBIS in their smaller cameras to switch from m4/3 to Fuji - like a lot my m4/3 gear, but I'm afraid for their future, and probably want to sell it before the price drop when it (maybe) is discontinued. Nobody knows the future for sure, why should it is be less risky to be invested into X Mount than MFT? I'd say MFT is still the safer bet, as X Mount exists at the whim of only one manufacturer. While MFT is supported by a diverse range of many companies. KnightsFan 1 Quote Link to comment Share on other sites More sharing options...
Django Posted January 27, 2020 Share Posted January 27, 2020 Announcement Feb 26 with a release in March 2020 is off to a good start! Quote Link to comment Share on other sites More sharing options...
MeanRevert Posted January 27, 2020 Share Posted January 27, 2020 So flippy screen? IronFilm, Juank and colepat 3 Quote Link to comment Share on other sites More sharing options...
Simon Young Posted January 28, 2020 Share Posted January 28, 2020 2 hours ago, IronFilm said: That is what open gate is for. Ouch, I knew X-T30 had a lower limit, didn't realize it was as low as only ten minutes!! Why Fuji why Fuji??? Protecting X-T3 sales. I think its really down to heat managment. Lots of tests out there show that the xt30 for example overheats rather quickly, even when recording externally IronFilm 1 Quote Link to comment Share on other sites More sharing options...
IronFilm Posted January 28, 2020 Share Posted January 28, 2020 Odd the X-T200 has better heat management than the X-T30! I guess they're learning? Quote Link to comment Share on other sites More sharing options...
frontfocus Posted January 28, 2020 Share Posted January 28, 2020 3 hours ago, IronFilm said: Odd the X-T200 has better heat management than the X-T30! I guess they're learning? X-Trans needs more CPU power so there is more heat. X-T200 is bayer and thus runs cooler IronFilm 1 Quote Link to comment Share on other sites More sharing options...
androidlad Posted January 28, 2020 Share Posted January 28, 2020 6K Open Gate, 6144x4096, 24/25/30p 6K UHD, 5760x3240, 24/25/30/48p 6K DCI, 6144x3240, 24/25/30/48p 6K Wide, 6144x2592, 24/25/30/48/50/60p 4K UHD, 3840x2160, 24/25/30/48p 4K DCI, 4096x2160, 24/25/30/48p 4K UHD (Crop), 3840x2160, 50/60p 4K DCI (Crop), 4096x2160, 50/60p 2K FHD, 1920x1080, 24/25/30/48/50/60p 2K DCI, 2048x1080, 24/25/30/48/50/60p 2K Wide, 2560x1080, 24/25/30/48/50/60/72/96/100/120p 2K FHD (Crop), 1920x1080, 72/96/100/120p Quote Link to comment Share on other sites More sharing options...
Emanuel Posted January 28, 2020 Share Posted January 28, 2020 @androidlad Any confirmed dates? Quote Link to comment Share on other sites More sharing options...
colepat Posted January 28, 2020 Share Posted January 28, 2020 1 hour ago, Emanuel said: @androidlad Any confirmed dates? Posted February 26 announcement. Earlier rumors stated shipping by end of March. Emanuel 1 Quote Link to comment Share on other sites More sharing options...
Marcio Kabke Pinheiro Posted January 28, 2020 Share Posted January 28, 2020 6 hours ago, frontfocus said: X-Trans needs more CPU power so there is more heat. X-T200 is bayer and thus runs cooler Maybe. But a GX85 / GX9 have kind of the same size, and runs for 30 mins without problem. Ok, they have less pixels to downsample, but I think that it is still feasible. I think that is market segmentation, really - or worse chipset tech. Quote Link to comment Share on other sites More sharing options...
Marcio Kabke Pinheiro Posted January 28, 2020 Share Posted January 28, 2020 14 hours ago, IronFilm said: Nobody knows the future for sure, why should it is be less risky to be invested into X Mount than MFT? I'd say MFT is still the safer bet, as X Mount exists at the whim of only one manufacturer. While MFT is supported by a diverse range of many companies. Kind of. The real supporters of the m4/3 format are Panasonic and Olympus - all the others (Blackmagic included) are very niche. From Panasonic, I clearly see a GH6 on the horizon, but not much more - there are rumors of a GX10, but as a minor update. Olympus just repackaged the E-M1 II in a smaller body to make the E-M5 MK III, and rumors says that the same sensor will be used for the E-M1 MK III. M4/3 evolution is dependant nowadays on Sony to evolve on sensors. Olympus is struggling financially to evolve their platforms (if the E-M1 MK III still use the same chipset, will be a VERY bad sign). Panasonic could repurpose the tech developed for the L cameras to m4/3, but don't see much intention to do it - everyone (except Fuji) is pushing full frame, better margins on bodies and (especially) lenses. As I said, I love my m4/3 gear, it fullfills almost all that I need (except low light - my dream camera is a proper GX body with IBIS and the GH5s internals). And I think that m4/3 will be a viable format for video for a good amount of time - but maybe not for stills, where the sales volumes are. And don't want to end with a bunch of bodies and lenses with very deprecated values in a phase out, like was with 4/3 users. And Fuji is doing a lot of things right. Have bodies and lenses with the same or a little more size and weight than m4/3 (for people, like me, that likes compact gear). In two generations jumped from some of the worst video tech for some of the best. Is (maybe) the only manufacturer that their bodies frequently surpasses expectations in specifications. Their prices are competitive. IBIS was the last barrier for me (I use a lot of vintage lenses), maybe they will be my future. frontfocus, Amazeballs and Juank 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.