Emanuel Posted March 14, 2020 Share Posted March 14, 2020 Quote Link to comment Share on other sites More sharing options...
Emanuel Posted March 20, 2020 Share Posted March 20, 2020 Quote Link to comment Share on other sites More sharing options...
Jimmy G Posted April 3, 2020 Share Posted April 3, 2020 Not sure what's going on with the IBIS in this video, but I had to stop watching after a couple of minutes because the frame edge wobbling was giving me a headache (from Levi Allen using a "loaner model")... Fuji Xt-4: Am I finally Switching Camera Systems? (Q&A) - YouTube: https://www.youtube.com/watch?v=rzKiT9fHaQw ...and based on the comments there, I'm not alone, oofah. Quote Link to comment Share on other sites More sharing options...
keessie65 Posted April 3, 2020 Share Posted April 3, 2020 3 minutes ago, Jimmy G said: Not sure what's going on with the IBIS in this video, but I had to stop watching after a couple of minutes because the frame edge wobbling was giving me a headache (from Levi Allen using a "loaner model")... Fuji Xt-4: Am I finally Switching Camera Systems? (Q&A) - YouTube: https://www.youtube.com/watch?v=rzKiT9fHaQw ...and based on the comments there, I'm not alone, oofah. Why does some guys still believe X-T4 is a steadycam. It's not a promotion for this camera. I could have done a better test, send me that camera please 😉 Emanuel 1 Quote Link to comment Share on other sites More sharing options...
androidlad Posted April 3, 2020 Share Posted April 3, 2020 Wide angle lens + IBIS are known to cause those corner warping wobble, it's from perspective change caused by sensor movement (the wider the more amplified), It happens with GH5 as well. Quote Link to comment Share on other sites More sharing options...
Simon Young Posted April 3, 2020 Share Posted April 3, 2020 I'm pretty sure I've seen at least 98 percent of all the preproduction videos on the X-T4, since I was super interested in buying it and replace my Z6 with it. I can safely say that the warping and wobble from the X-T4 is worse than all the cameras I've ever tried or owned (A7III, Olympus EM-1 II, Z6 and GH5). This is a huge disappointment. I've also seen one video where the guys testing the X-T4, I think in Malaysia, gets the camera to overheat within 15 minutes, something that never happened with my X-T3. What I find especially disturbing is that if you are hand holding the X-T4 with as little movement as possible it still exhibits warping, even on a moderately wide lens like the 16mm. This doesn't happen with my Z6 on a 24mm. It's very very stable. Quote Link to comment Share on other sites More sharing options...
MrSMW Posted April 4, 2020 Share Posted April 4, 2020 From what I have seen, so many of these tests seem to involve waving the camera around and then saying, hey, look at how bad this is. Quite often, by someone who isn't into Fuji or does reviews from their bedroom in their parents basement. Perhaps a slight exaggeration but I have seen plenty of rock steady output which is what I am looking for and on Fuji lenses such as the 50mm f2 which will be my go to if this season ever gets going. And an XT4 appears in reality. I'm a longer lens kind of guy. I suspect any other warping issues will have been resolved by then as Fuji historically fix this kind of thing. Hardware, less easy/impossible such as if you hate the screen like I do, you either have to live with it or do something else, but I am pretty sure this warp/wobble thing won't be a thing in the second half of this year. heart0less and IronFilm 2 Quote Link to comment Share on other sites More sharing options...
Simon Young Posted April 4, 2020 Share Posted April 4, 2020 4 hours ago, MrSMW said: From what I have seen, so many of these tests seem to involve waving the camera around and then saying, hey, look at how bad this is. Quite often, by someone who isn't into Fuji or does reviews from their bedroom in their parents basement. He's using the 10-24mm which would cause a problem on any IBIS system, but notice how even when he's trying to hold the camera still, there's excessive warping. The only time it looks ok is when he's on his boat, with the camera presumably fixed with a gorilla. Unusable. It would look ten times better with the X-T3 and the 10-24mm only using OIS of the lens. Quote Link to comment Share on other sites More sharing options...
Django Posted April 4, 2020 Share Posted April 4, 2020 19 hours ago, Simon Young said: I'm pretty sure I've seen at least 98 percent of all the preproduction videos on the X-T4, since I was super interested in buying it and replace my Z6 with it. I can safely say that the warping and wobble from the X-T4 is worse than all the cameras I've ever tried or owned (A7III, Olympus EM-1 II, Z6 and GH5). This is a huge disappointment. I've also seen one video where the guys testing the X-T4, I think in Malaysia, gets the camera to overheat within 15 minutes, something that never happened with my X-T3. The potential overheating issue is much more of a deal breaker to me. You got a link to that video? I was set to purchase a X100V as travel hybrid but the camera overheated after 5 minutes (!!!) during a basic 4K test at the camera shop. Even during still shooting I could feel the back of the camera get hot (now a known issue on the X100V). I'm sort of fearing Fuji is cramming too high specs for their compact bodies, a problem Sony got into around A7R2. heart0less 1 Quote Link to comment Share on other sites More sharing options...
chadandreo Posted April 4, 2020 Share Posted April 4, 2020 2 hours ago, Django said: The potential overheating issue is much more of a deal breaker to me. You got a link to that video? I was set to purchase a X100V as travel hybrid but the camera overheated after 5 minutes (!!!) during a basic 4K test at the camera shop. Even during still shooting I could feel the back of the camera get hot (now a known issue on the X100V). I'm sort of fearing Fuji is cramming too high specs for their compact bodies, a problem Sony got into around A7R2. Luckily we’re dealing with APSC and not FF. IronFilm 1 Quote Link to comment Share on other sites More sharing options...
Simon Young Posted April 4, 2020 Share Posted April 4, 2020 5 hours ago, Django said: The potential overheating issue is much more of a deal breaker to me. You got a link to that video? I was set to purchase a X100V as travel hybrid but the camera overheated after 5 minutes (!!!) during a basic 4K test at the camera shop. Even during still shooting I could feel the back of the camera get hot (now a known issue on the X100V). I'm sort of fearing Fuji is cramming too high specs for their compact bodies, a problem Sony got into around A7R2. See the overheating around 8:50. I actually bought the X100V despite the overheating, I'm only using it for photos but it gets really hot as you say. I've got really high hopes for Canon this year but knowing Canon I'm not holding my breath. Quote Link to comment Share on other sites More sharing options...
kaylee Posted April 5, 2020 Share Posted April 5, 2020 in the spirit of togetherness, would somebody pretty please tell me what the key reasons are that ppl are unhappy with the XT4, so I can avoid reading a heap of stuff...? Quote Link to comment Share on other sites More sharing options...
IronFilm Posted April 5, 2020 Share Posted April 5, 2020 15 minutes ago, kaylee said: in the spirit of togetherness, would somebody pretty please tell me what the key reasons are that ppl are unhappy with the XT4, so I can avoid reading a heap of stuff...? From keeping up with the thread myself, I'd say: 1) IBIS, but this is controversial... some are just saying the testers are being unrealistic 2) overheating? (although like the latest video said which raised this "issue", if you flip out the screen then that releases the heat. But he didn't go into how much longer the camera can go if you flip it out always?) Remember, the X-T4 is still only pre order, wait until it ships and gets into more hands before judging it! kaylee, keessie65 and Stathman 3 Quote Link to comment Share on other sites More sharing options...
Devon Posted April 16, 2020 Share Posted April 16, 2020 On 1/23/2020 at 2:13 PM, Andrew Reid said: Well, have you seen what e-infinity is selling the A7R IV for? £2200. It is £3500 in the UK shops. No wonder they have sold a bucket load. E-infinity isn't a good representative for the market, the pricing is a fluke and they are a niche grey market store. @Andrew Reid Have you purchased anything from E-Infinity? Is it worth it? Anybody else buy from E-Infinity/grey market? Quote Link to comment Share on other sites More sharing options...
Fairkid Posted April 16, 2020 Share Posted April 16, 2020 1 hour ago, Devon said: @Andrew Reid Have you purchased anything from E-Infinity? Is it worth it? Anybody else buy from E-Infinity/grey market? Yes, lots to the UK. Have had one problem with a lens which I sent back and got a replacement - this made me feel vulnerable as hell but they came good and all was well in the end. Definitely not the usual brick and motor experience but the savings are worth it IMO. Quote Link to comment Share on other sites More sharing options...
Devon Posted April 17, 2020 Share Posted April 17, 2020 8 hours ago, Fairkid said: Yes, lots to the UK. Have had one problem with a lens which I sent back and got a replacement - this made me feel vulnerable as hell but they came good and all was well in the end. Definitely not the usual brick and motor experience but the savings are worth it IMO. Thank you! Have you purchased any camera bodies grey market? Quote Link to comment Share on other sites More sharing options...
MrSMW Posted April 17, 2020 Share Posted April 17, 2020 Haven’t used e-infinity for a while but had zero problems. Instead, have been buying all my kit new (cheaper than refurbed used prices) from e-global. Beware one thing though, return is a PITA, at your expense and to China! After I decided not to keep a gimbal, it was better to sell it on eBay...which is what I did. But if it’s not going to be returned, very good prices though delivery a bit slow. Normally they quote something like 6-8 days but the reality is more like 2-3 weeks, but as long as your need is not urgent, prices are very good. Quote Link to comment Share on other sites More sharing options...
Devon Posted April 17, 2020 Share Posted April 17, 2020 1 hour ago, MrSMW said: Haven’t used e-infinity for a while but had zero problems. Instead, have been buying all my kit new (cheaper than refurbed used prices) from e-global. Beware one thing though, return is a PITA, at your expense and to China! After I decided not to keep a gimbal, it was better to sell it on eBay...which is what I did. But if it’s not going to be returned, very good prices though delivery a bit slow. Normally they quote something like 6-8 days but the reality is more like 2-3 weeks, but as long as your need is not urgent, prices are very good. thanks for the info! Is this what you’re referring to? https://www.eglobalcentral.com Looks like e-infinity has better prices still. I assume the price fluctuates between the two? Quote Link to comment Share on other sites More sharing options...
funkyou86 Posted April 17, 2020 Share Posted April 17, 2020 2 hours ago, Devon said: thanks for the info! Is this what you’re referring to? https://www.eglobalcentral.com Looks like e-infinity has better prices still. I assume the price fluctuates between the two? Be careful with grey market, sometimes they're great, sometimes they're pain in the ass. I ordered a fujinon lens in the end of january from eglobal, but after ofew weeks the lens was still "on it's way", so I reported it to paypal. 1 day before my paypal case got closed (and got my money back) they actually shipped the lens. By that time I have bought another one, so now I'm stuck with two 23mm lenses. Not sure about einfinity, but definately avoid eglobal. Quote Link to comment Share on other sites More sharing options...
MrSMW Posted April 17, 2020 Share Posted April 17, 2020 I have purchased 10-12 major items through either eglobal.fr or .be so France or Belgium. No issues other than attempted return on an item so their returns policy sucks balls! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.