thebrothersthre3 Posted February 19, 2020 Share Posted February 19, 2020 I've heard prores is quite a bit better at handling moire on the Ursa Mini 4.6k. That is something I am fine with if its tolerable in prores. I am looking at these OLPF filters from china off ebay. I wonder if one of those can be installed. Are OLPF's very camera specific, anyone know? There are also cheap OLPF filters taken from canon cameras that I could try out. I know there are options actually designed for the Ursa Mini but I am putting together a cheap ass rig so I don't want to spend $400 on one, which is like a 4th of what the camera cost me lol Quote Link to comment Share on other sites More sharing options...
mercer Posted February 19, 2020 Share Posted February 19, 2020 They're sensor specific but you can probably get by without one. If it's anything like the Micro/Pocket, moiré is a lot better in ProRes. If you're going to get one, though, look into the RawLite brand. I believe it has an IR Cut Filter built in, so that alone is worth the extra cost. They'll pop up on eBay once in a while. Quote Link to comment Share on other sites More sharing options...
thebrothersthre3 Posted February 19, 2020 Author Share Posted February 19, 2020 I found an IR cut filter from a Chinese company that I think I'll purchase. Hard to go wrong at $35 bucks. Its listed as for the Ursa Mini 4.6k specifically. 1 hour ago, mercer said: They're sensor specific but you can probably get by without one. If it's anything like the Micro/Pocket, moiré is a lot better in ProRes. If you're going to get one, though, look into the RawLite brand. I believe it has an IR Cut Filter built in, so that alone is worth the extra cost. They'll pop up on eBay once in a while. Quote Link to comment Share on other sites More sharing options...
IronFilm Posted February 19, 2020 Share Posted February 19, 2020 I'd rate an IR cut filter as more important than a moire one. Geoff CB and deezid 2 Quote Link to comment Share on other sites More sharing options...
thebrothersthre3 Posted February 19, 2020 Author Share Posted February 19, 2020 3 hours ago, IronFilm said: I'd rate an IR cut filter as more important than a moire one. yeah hopefully this thing from China works lol. I had considered just using screw on filter adapters but its kind of a pain Quote Link to comment Share on other sites More sharing options...
majoraxis Posted February 21, 2020 Share Posted February 21, 2020 On 2/19/2020 at 4:48 AM, thebrothersthre3 said: yeah hopefully this thing from China works lol. @thebrothersthre3 Thanks for this thread! Please post if it works well or not and if so, a link to purchase it. Thanks! Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.