WorkMonkey Posted March 16, 2014 Share Posted March 16, 2014 Hey gang, noob here. I am trying to install ML on my 5D Mark III using the RAW Shooting Guide from EOSHD. I'm following the instructions, but when I get to step 2 of the ML install (installing the nightly build), I get the message that the update file cannot be found. I've tried different cards, and same thing. If there is another thread on this, I apologize. Just point the way. Otherwise, anyone have any advice? Link to comment Share on other sites More sharing options...
Musty Posted March 16, 2014 Share Posted March 16, 2014 Hi and welcome. Did you download the latest nightly build and the correct one for your firmware version? Make sure you grab the latest one from here: http://builds.magiclantern.fm/#/ Link to comment Share on other sites More sharing options...
WorkMonkey Posted March 16, 2014 Author Share Posted March 16, 2014 I did. It doesn't have a firmware file though - which the EOSHD guide specifies you need. Link to comment Share on other sites More sharing options...
Musty Posted March 16, 2014 Share Posted March 16, 2014 What I mean is, you need to make sure that you download the correct version of ML that works on your version firmware. There is firmware version 113 & 123. Look in the menu on your 5D MKIII to find out what version firmware you have running on it, then download the correct version of ML. Extract the files to your SD card and that is it, you don't need any other files. Link to comment Share on other sites More sharing options...
WorkMonkey Posted March 16, 2014 Author Share Posted March 16, 2014 Ah yes, I did that. I loaded firmware version 113 and had the correct version of ML at least in step one. It loaded fine for step one - it was step two with the nightly build that wouldn't work. It says to copy these files to the SD card: - autoexec.bin (the auto-boot file and compiled source code) - 5D3-113-bootflag.fir (enables Magic Lantern when the camera turns on) - ML (this should overwrite the folder already present) However, if you downloaded the latest build, it does not contain the bootflag firmware file. If you go to the link provided in the guide, it dows have the firmware file, but it can't find the update file. Link to comment Share on other sites More sharing options...
Bioskop.Inc Posted March 17, 2014 Share Posted March 17, 2014 I haven't used/updated my version of ML for a while, but if i remember rightly you had to first install the stable Unified version of ML (get that working) & once that was done, you replace with the files which come in the Nightly Build. Link to comment Share on other sites More sharing options...
aaristim Posted March 17, 2014 Share Posted March 17, 2014 ML for 1.2.3 firmware was released yesterday and seems to be working properly! :) http://www.magiclantern.fm/forum/index.php?topic=11017.75 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now