Davide DB Posted November 18, 2023 Share Posted November 18, 2023 Hi all, Is it a R5C used here? A C70? O neither of the two? ISO 12800 Quote Link to comment Share on other sites More sharing options...
gt3rs Posted November 18, 2023 Share Posted November 18, 2023 1 hour ago, Davide DB said: Hi all, Is it a R5C used here? A C70? O neither of the two? ISO 12800 To me the camera on the ronin is a Sony and I would guess is A7s III Davide DB and Juank 1 1 Quote Link to comment Share on other sites More sharing options...
Davide DB Posted November 18, 2023 Share Posted November 18, 2023 The cinematography of the frogs part is stunning PannySVHS 1 Quote Link to comment Share on other sites More sharing options...
Davide DB Posted November 18, 2023 Share Posted November 18, 2023 52 minutes ago, gt3rs said: To me the camera on the ronin is a Sony and I would guess is A7s III You are right. It's a Sony. Could be A7SIII or R or A1. Without seeing the upper part, it's hard. Quote Link to comment Share on other sites More sharing options...
ND64 Posted November 18, 2023 Share Posted November 18, 2023 2 hours ago, Davide DB said: Without seeing the upper part, it's hard. You don't need the upper part, its A7siii. Davide DB, PannySVHS and Emanuel 1 1 1 Quote Link to comment Share on other sites More sharing options...
kye Posted November 19, 2023 Share Posted November 19, 2023 On 11/19/2023 at 3:37 AM, Eric Calabros said: You don't need the upper part, its A7siii. Hot damn! You mean we can shrink the camera bodies by just lopping bits off? Where's my hacksaw!! Quote Link to comment Share on other sites More sharing options...
ntblowz Posted December 16, 2023 Share Posted December 16, 2023 Josh did R5C vs FX3 Canon without Clog2 is really limiting the DR. https://youtu.be/4tpBrNbf050?si=YsGJTc6_Zl_995cX Quote Link to comment Share on other sites More sharing options...
Django Posted December 16, 2023 Share Posted December 16, 2023 Actually his test reveals very similar DR between the two with R5C having way better highlight latitude and FX3 cleaner shadow info. But its worth noting FX3 uses high amount of internal NR whereas you can dial it down on R5C. You can also access Clog2 if you shoot in RAW. So unless you need that 12,500 ISO for like extreme low-light situations, R5C is imo way better than FX3 in almost all categories. The fact FX3 still doesn't even have shutter angle is blasphemy. Quote Link to comment Share on other sites More sharing options...
spinkscapes Posted February 18 Share Posted February 18 On 12/17/2023 at 12:17 AM, Django said: Actually his test reveals very similar DR between the two with R5C having way better highlight latitude and FX3 cleaner shadow info. But its worth noting FX3 uses high amount of internal NR whereas you can dial it down on R5C. You can also access Clog2 if you shoot in RAW. So unless you need that 12,500 ISO for like extreme low-light situations, R5C is imo way better than FX3 in almost all categories. The fact FX3 still doesn't even have shutter angle is blasphemy. Plus it doubles as an exceptional stills camera (which is great for me as a backup as a wedding photography camera). Also Josh is quickly becoming one of my favourite Youtubers with his in-depth discussions which aren't dry or boring. Quote Link to comment Share on other sites More sharing options...
Ty Harper Posted August 8 Share Posted August 8 With Canon's new C400 shipping with a brand new detachable USB-C based monitor, I've been musing on whether it might be compatible with the R5C with a firmware update, similar to what Canon did to make the C200's LM-V1 monitor compatible with the C300 MKII. As far as the technical side goes, it seems like both the R5C and C400 have the exact same USB-C 3.2 Gen 1 port. Also, I did not know this but page 123 of the R5C's video manual seems to confirm that it can output a max 8K 30p resolution via its USB-C port. I also made a call to Canon USA tech support, and while the person could not confirm that the C400's monitor would be made compatible with the R5C, they did not outright deny that is was technically impossible. Now obviously I can't be sure the person I spoke to was a reliable source. I also think there might be a chance that while the R5C and the C400 have the same USB-C port, that the amount of power they can support might be different. All that said, it seems like there is a chance that at least technically speaking the C400's monitor (along with its coveted touch screen AF features) could be compatible with the R5C, which imo would be a fantastic addition to its feature set. Particularly for gimbal use. I've included a pic of the C400 with its monitor attached to an RS3 Pro to demonstrate what I'm getting at! Anyways, it would be great if the more tech savvy amongsr use could do their own digging to see if this is indeed true. But either way it probably wouldn't hurt to nudge Canon so at the very least they know there is demand for such a firmware update from R5C and maybe even C70 owners (altho I'm not sure if the C70 has the same USB-C port). Juank 1 Quote Link to comment Share on other sites More sharing options...
Ty Harper Posted October 12 Share Posted October 12 Wow, so Matthew Allard over at Newsshooter is reporting that the Shinobi MKII will have a new FW update that allows it to do touch focus AF with the Canon R6 MKII (among other non-Canon cameras). The R5C is not on the list yet, but this all seems promising. Here's an excerpt from the original Atomos press release: "At IBC, Atomos (Hall 11, D25) announces major new functionality for Shinobi II, the amazingly successful Photo | Video Monitor. Users get a world’s first: on-monitor touch auto focus and focus subject tracking, in both photo and video camera modes, and it’s a free update for all existing users. The first camera models to be supported are from Sony (A7 MkIV), Canon (R6 Mark II), Panasonic (S5 II) and Fujifilm (GFX100 II). Nikon is also now supported for photo and video modes, with auto focus and focus subject tracking to follow in future updates." Sorry if this has already been posted but don't recall seeing it. Davide DB 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.