Simon2022 Posted March 6, 2022 Share Posted March 6, 2022 Hi, new to the forum. I recently picked up a Canon 1DC and today a Ninja V. The Ninja V just says 'no input' when I connect the 1DC. I've connected the 1DC to a TV with the same cable and the picture appears on screen. I've also plugged my XT3 into the Ninja V and it works fine. Any idea what the issue is with the 1 DC? I've tried all combinations of settings, eg mirroring on/off, auto frame rate etc. Is there something I've overlooked? thanks Simon Quote Link to comment Share on other sites More sharing options...
webrunner5 Posted March 8, 2022 Share Posted March 8, 2022 This link says the 1DC is compatible so... https://www.atomos.com/compatible-cameras?product=ninja-v Quote Link to comment Share on other sites More sharing options...
Ty Harper Posted March 8, 2022 Share Posted March 8, 2022 Sorry to hear! I have a 1DC and have also been eyeing a Ninja V so will be watching this thread. Hope it all works out tho! Quote Link to comment Share on other sites More sharing options...
Simon2022 Posted March 10, 2022 Author Share Posted March 10, 2022 Hi, Thanks for the replies, I now have it working. Initially on the 'input tab' on the Ninja it is set to a default of "Compatibility" which I expected the Ninja to auto detect the output however it appears not. When quickly toggling between the modes nothing was happening however it now seems it needs 5 seconds or more to go live with the signal after being selected. When I leave the input to "HDMI 1.4" it now works as expected. My main fear was that there was a hardware issue with the camera itself. See photo below of the settings. hope this helps Simon leslie, webrunner5 and Ty Harper 3 Quote Link to comment Share on other sites More sharing options...
Matthias Scheja Posted March 26, 2022 Share Posted March 26, 2022 How do you feel about the monitor on the hotshoe-mount? Is it safe? Smallrig offers a cage for the 1dc. (200$) don't know if i should order one. https://www.amazon.de/dp/B07WDG71B5/ref=cm_sw_r_apan_i_AW9G76HHPQMJ5YM5DWAP Quote Link to comment Share on other sites More sharing options...
webrunner5 Posted April 6, 2022 Share Posted April 6, 2022 Some of the high-end Canon flash units are surprisingly heavy and large. So, I think it would be ok, but sure a cage is always a safer bet. Matthias Scheja 1 Quote Link to comment Share on other sites More sharing options...
Simon2022 Posted April 11, 2022 Author Share Posted April 11, 2022 On 3/26/2022 at 1:30 PM, Matthias Scheja said: How do you feel about the monitor on the hotshoe-mount? Is it safe? Smallrig offers a cage for the 1dc. (200$) don't know if i should order one. https://www.amazon.de/dp/B07WDG71B5/ref=cm_sw_r_apan_i_AW9G76HHPQMJ5YM5DWAP The SmallRig cage for the 1DC etc is now discontinued and not available new. I did manage to pick one up secondhand from eBay in good condition. The cage is a pretty good fit and I 3D printed a support for the HDMI cable that screws onto the rig. I do have the original cable support but can't figure our how it clips into the body, it seems way too tight. The Ninja isn't too heavy for the hotshoe, it maybe a problem if the Ninja gets knocked and all the impact gets transferred to the hotshoe though. Matthias Scheja 1 Quote Link to comment Share on other sites More sharing options...
Matthias Scheja Posted April 17, 2022 Share Posted April 17, 2022 On 4/12/2022 at 12:52 AM, Simon2022 said: The SmallRig cage for the 1DC etc is now discontinued and not available new. I did manage to pick one up secondhand from eBay in good condition. The cage is a pretty good fit and I 3D printed a support for the HDMI cable that screws onto the rig. I do have the original cable support but can't figure our how it clips into the body, it seems way too tight. The Ninja isn't too heavy for the hotshoe, it maybe a problem if the Ninja gets knocked and all the impact gets transferred to the hotshoe though. Thank you for your reply. You can order it from small rig. They can reproduce it. Just email them and you receive a offer (~200$) with a special url to their shop. webrunner5 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.