Simon L Robinson Posted October 21, 2016 Share Posted October 21, 2016 Film Convert have just released their profiles for the XC10, I really want to get my hands on this camera. An XC15 combined with mt a7s would make a killer combo for my needs. Justin Bacle and Lintelfilm 2 Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted October 21, 2016 Share Posted October 21, 2016 Life just got way easier Quote Link to comment Share on other sites More sharing options...
mercer Posted October 21, 2016 Share Posted October 21, 2016 15 hours ago, kidzrevil said: I honestly thinks its in fact the temporal NR. I don't see any of the compression artifacts I used to see in h.264 codecs with low bitrates @tugela Agreed ! I've been pleasantly surprised with CLOG and how easy it is to grade. @BenEricson here is my first attempt at CLOG How are you using a grey card when you are shooting this type of guerilla filming? I've never used a grey card for exposure or WB, so please be detailed. And are you using any zebras or metering to judge your exposure? I haven't shot too much in 4K with the XC10, but I'd like to start. Quote Link to comment Share on other sites More sharing options...
hyalinejim Posted October 21, 2016 Share Posted October 21, 2016 6 hours ago, kidzrevil said: Life just got way easier Thanks Santa! And thanks FilmConvert for decent colour separation at a mouse click! CLog with FilmConvert and a highlight saturation roll off. Here's where I'd been at in terms of trying for nice colour: And I think it's not bad, but I was introducing edge artifacts and accentuating compression blocks. FilmConvert does a really good job of getting psychologically realistic colours without the image falling apart. I had noticed an overall colour cast to the images that I found hard to shake and I think some LUTs just cover over it but FilmConvert actually seems to be converting (what look like to me) a whole bunch of greens and purples and turning them into... real colour. 2 hours ago, mercer said: How are you using a grey card when you are shooting this type of guerilla filming? I've never used a grey card for exposure or WB, so please be detailed. I got a 30cm Lastolite EzyBalance yesterday. It folds up and stuffs away into your bag. When unfolded it's big enough to fill the screen. Stick it in front of the lens in the light you're going to be shooting in and select custom white balance 1 or 2 then press set. You should have neutral colours for the rest of that shoot as long as the light temperature doesn't change. On 20/10/2016 at 2:52 PM, kidzrevil said: @hyalinejim we should get a thread going about this ! Hopefully we get enough user support to convince Canon to disable that NR. Canon have replied to me asking for samples: Quote Thank you for contacting us in regards to your XC10 camcorder. I understand that you are concerned about a ghosting effect that is occurring on your unit. We wound kindly ask if you can provide some samples showing the issue so we can investigate this further. Maybe I will start a new thread on this. Canon have already issued two firmware updates, and have included improvements to noise reduction and rolling shutter. So why not this? Lintelfilm and mercer 2 Quote Link to comment Share on other sites More sharing options...
Amook Posted October 21, 2016 Share Posted October 21, 2016 I'm curious if anyone has hooked the xc10 up to an external recorder? Is there any chance it would help with the noise reduction and ghosting? Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted October 21, 2016 Share Posted October 21, 2016 4 hours ago, mercer said: How are you using a grey card when you are shooting this type of guerilla filming? I've never used a grey card for exposure or WB, so please be detailed. And are you using any zebras or metering to judge your exposure? I haven't shot too much in 4K with the XC10, but I'd like to start. I use the expodisc, works really well most of the time but I have trouble white balancing in mixed lighting. You put it infront your lens run the custom white balance and your good to go. Generally I expose my images by eye. I still go by ansel adams zone system since all these cameras meter exposure different. The last vid I did I ended up shooting on Av mode f5.6 with the exposure locked at 500 +1 overexposed. That works for run and gun too! PM me @hyalinejim so we can compile the info needed to start the thread. If anyone else wants to contribute to the thread please PM me as well with a link to the uploaded video showing ghosting. If possible send the xml file with the metadata to me as well Quote Link to comment Share on other sites More sharing options...
Tim Sewell Posted October 21, 2016 Share Posted October 21, 2016 A couple of stills from my Disneyland trip (don't ask!) that I've graded in FilmConvert with the new profiles. 5207 Vis3, 60% film colour, 65% Super 16 grain. Tweaks to curve and saturation. Edit: shot in Canon log at ISO 500 (apart from the last one, which I think was at 2000. I'm really loving the image I get this camera - it may not be for everybody, but it matches my sensibilities. Knowing it is capable of producing exactly what I want and that it's so easy to use makes me want to shoot a lot more, which is - obviously - the best way to get better at anything! TheRenaissanceMan, kidzrevil, hyalinejim and 2 others 5 Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted October 22, 2016 Share Posted October 22, 2016 @Tim Sewell that last image with the kids looks cinematic as hell ! Love it Quote Link to comment Share on other sites More sharing options...
Lintelfilm Posted October 22, 2016 Share Posted October 22, 2016 22 hours ago, kidzrevil said: I use the expodisc, works really well most of the time but I have trouble white balancing in mixed lighting. You put it infront your lens run the custom white balance and your good to go. Generally I expose my images by eye. I still go by ansel adams zone system since all these cameras meter exposure different. The last vid I did I ended up shooting on Av mode f5.6 with the exposure locked at 500 +1 overexposed. That works for run and gun too! PM me @hyalinejim so we can compile the info needed to start the thread. If anyone else wants to contribute to the thread please PM me as well with a link to the uploaded video showing ghosting. If possible send the xml file with the metadata to me as well I agree we should start a thread. I'm away from my mac this weekend but will repost the stills I posted to this thread next week. I'll also contact Canon direct like you did. Let's make a ruckus. Even if it just makes them aware of it or they explain what's causing it would be something. If any XC10 owners here haven't registered with CPN (the XC10 makes you eligible) I suggest you do so and voice your concern via that way. No doubt you'll get more attention than consumer channels. might be a bad idea to dilute the message but if they do release another firmware update I'd also like to lobby canon to add the waveform and shutter angle features from the xc15 to the XC10! mercer and kidzrevil 2 Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted October 22, 2016 Share Posted October 22, 2016 good idea on registering for CPN ! Im going to have the post up within the hour we could do another thread on feature requests for the xc10, for now lets tackle the essentials @Lintelfilm Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted October 22, 2016 Share Posted October 22, 2016 Quote Link to comment Share on other sites More sharing options...
hyalinejim Posted October 23, 2016 Share Posted October 23, 2016 On 10/21/2016 at 10:08 PM, Tim Sewell said: A couple of stills from my Disneyland trip (don't ask!) that I've graded in FilmConvert with the new profiles. 5207 Vis3, 60% film colour, 65% Super 16 grain. @Tim Sewell Forgive me for mentioning it if you already know this: FilmConvert will blur your footage at anything less than the 35mm sizes to simulate the softness of smaller film stocks. If you like the size of 16mm grain but want to maintain sharpness then pick the next size up. I'm very happy with XC10 + FilmConvert. Will upload some nice landscape stuff later. Also I've found a great example of spatial noise reduction killing detail at low ISO. Hold on to your hats Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted October 23, 2016 Share Posted October 23, 2016 the new filmconvert allows you to adjust softness @hyalinejim try it out @Tim Sewell Quote Link to comment Share on other sites More sharing options...
Tim Sewell Posted October 23, 2016 Share Posted October 23, 2016 Hey guys - yeah, I know. I'm chasing that super 16 feel with this, so I'm selecting that grain structure - but I'm dialling it down to around 60% as I find the filmconvert implementations to be a little aggressive (plus, we're, like, in the digital age, right?). Thanks for the thoughts though - I respect the work you put out and I'm always happy to hear your comments. Quote that last image with the kids looks cinematic as hell ! Love it Coming from you I take that s high praise indeed - I love your stuff and aspire to be able to create anything even half as good! I thought that was pretty cinematic too - the beauty of this camera is that it has a depth in underexposure that allows you to grade to the image, not to the noise, which is kind of like... film! kidzrevil 1 Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted October 23, 2016 Share Posted October 23, 2016 9 minutes ago, Tim Sewell said: Hey guys - yeah, I know. I'm chasing that super 16 feel with this, so I'm selecting that grain structure - but I'm dialling it down to around 60% as I find the filmconvert implementations to be a little aggressive (plus, we're, like, in the digital age, right?). Thanks for the thoughts though - I respect the work you put out and I'm always happy to hear your comments. Coming from you I take that s high praise indeed - I love your stuff and aspire to be able to create anything even half as good! I thought that was pretty cinematic too - the beauty of this camera is that it has a depth in underexposure that allows you to grade to the image, not to the noise, which is kind of like... film! wow you just gave me an idea check this article out. One of my favorite DP's underexposes images and brings it up in post and the effect is beautiful....thinking maybe we can get the same result out the xc10 http://nofilmschool.com/2016/08/how-cinematographer-christian-sprenger-shot-donald-glovers-atlanta Quote Link to comment Share on other sites More sharing options...
Tim Sewell Posted October 23, 2016 Share Posted October 23, 2016 Quote wow you just gave me an idea Ha. Yeah, well I don't think it's gonna go to 3 or 4 stops (else Arri would have a problem here) - but, coming from a Canon stills experience, there is a depth to the underexposure in their imager that gives you tonality rather than just noise soup. Canon log, especially, seems to retain colour in underexposure that can give you really painterly tones. I'm experimenting with it now. kidzrevil 1 Quote Link to comment Share on other sites More sharing options...
hyalinejim Posted October 23, 2016 Share Posted October 23, 2016 Some landscape shots from a country walk yesterday. 4K CLog ETTR at ISO 500 to 1000. FilmConvert Kodak 5213 Vis3. Very pleased with sky v foliage v skintone colour separation using FilmConvert on XC10 footage. Tim Sewell 1 Quote Link to comment Share on other sites More sharing options...
kidzrevil Posted October 23, 2016 Share Posted October 23, 2016 that shot at 0:30 is mindblowing @hyalinejim im gonna keep that in mind when exposing the image. My personal max iso for 4k footage is going to be 1000 iso. Testing the 1080p footage to see if it holds up better than the 4k Quote Link to comment Share on other sites More sharing options...
Tim Sewell Posted October 23, 2016 Share Posted October 23, 2016 25 minutes ago, hyalinejim said: Some landscape shots from a country walk yesterday. 4K CLog ETTR at ISO 500 to 1000. FilmConvert Kodak 5213 Vis3. Very pleased with sky v foliage v skintone colour separation using FilmConvert on XC10 footage. You've got to love that this is a camera that you can sling around your neck and look like Joe Tourist yet grab images of this depth and colour. When it came out the reviews were dire, yet everyone who has actually used it sings its praises to the ceiling. Canon - shitty marketing department, sensor department on steroids. Quote Link to comment Share on other sites More sharing options...
hyalinejim Posted October 23, 2016 Share Posted October 23, 2016 4 minutes ago, Tim Sewell said: You've got to love that this is a camera that you can sling around your neck and look like Joe Tourist yet grab images of this depth and colour. Yes, and if you hold it at waist height with the screen flipped up it looks like you're just figuring out how to use it, or fiddling with some settings. 33 minutes ago, kidzrevil said: Testing the 1080p footage to see if it holds up better than the 4k Looking forward to the results @kidzrevil. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.