Danyyyel Posted June 25 Share Posted June 25 6 hours ago, zlfan said: this is about 40 MB/s. about the same as redcode 42. compression ratio is about 8. workable but not the best quality. This is the normal bitrate, they have a higher bitrate one, it at least give you the capability to shoot raw at what used to be normal h264/265 bitrate. zlfan 1 Quote Link to comment Share on other sites More sharing options...
Simon Young Posted June 25 Share Posted June 25 8 hours ago, Eric Calabros said: If all you need is 4k24p raw, the bitrate is only 340mbs Is the 4K raw downsampled from 6K, thus not really raw? Emanuel 1 Quote Link to comment Share on other sites More sharing options...
ac6000cw Posted June 25 Share Posted June 25 1 hour ago, Simon Young said: Is the 4K raw downsampled from 6K, thus not really raw? As the 4032 x 2268 RAW video is listed as [FX] (full-frame) in the tables, I think it probably is down-sampled - a couple of pages from the Z6 iii manual: Emanuel 1 Quote Link to comment Share on other sites More sharing options...
zlfan Posted June 26 Share Posted June 26 z6 iii's achilles' heel is ibis. otherwise, I probably will pull the trigger, as it has 6k raw 6p, 20 fps for 1000 frames, z-mount shortest flange distance. af seems good. Beritar and ac6000cw 2 Quote Link to comment Share on other sites More sharing options...
Beritar Posted June 26 Share Posted June 26 1 hour ago, zlfan said: z6 iii's achilles' heel is ibis. otherwise, I probably will pull the trigger, as it has 6k raw 6p, 20 fps for 1000 frames, z-mount shortest flange distance. af seems good. Same here. With better IBIS, I would have pulled the trigger immediatly. The in camera Proresraw, which mean almost zero noise reduction and sharpening along with the 6K 60fps are really tempting. zlfan 1 Quote Link to comment Share on other sites More sharing options...
Emanuel Posted June 26 Share Posted June 26 54 minutes ago, Beritar said: Same here. With better IBIS, I would have pulled the trigger immediatly. The in camera Proresraw, which mean almost zero noise reduction and sharpening along with the 6K 60fps are really tempting. To me, reports of no overheating no less but price places it at the Z8 range, it's pricey for now IMO. It will come to the territory of $2K-2.5K soon, though... Then it will become harder to not buy it. I've just purchased the BMCC6K-FF new for €1444.54... Pretty neat and impossible to miss it! ;- ) Beritar 1 Quote Link to comment Share on other sites More sharing options...
zlfan Posted June 26 Share Posted June 26 I already have different kinds of video cams. 4k or oversampled 1080p are enough for me. 11 stop dr is fine for me too. I need latest cams mostly for the ibis. I have go pro 12 as a pocket cam, I will buy an om-1 during the Christmas season. I have not decided a full frame one yet. Quote Link to comment Share on other sites More sharing options...
zlfan Posted June 26 Share Posted June 26 13 hours ago, Emanuel said: To me, reports of no overheating no less but price places it at the Z8 range, it's pricey for now IMO. It will come to the territory of $2K-2.5K soon, though... Then it will become harder to not buy it. I've just purchased the BMCC6K-FF new for €1444.54... Pretty neat and impossible to miss it! ;- ) how can you stabilize bmpcc 6k ff? Quote Link to comment Share on other sites More sharing options...
Emanuel Posted June 27 Share Posted June 27 6 hours ago, zlfan said: how can you stabilize bmpcc 6k ff? Here you have an example of it :- ) zlfan 1 Quote Link to comment Share on other sites More sharing options...
kye Posted June 27 Share Posted June 27 9 hours ago, Emanuel said: Here you have an example of it :- ) That doesn't look good to me at all... It had the blur bursts, warping, also towards the end wasn't stabilised well with sort of jumpy and floaty motion. Getting it right in-camera still matters for now, until AI can sort out this issue too. Quote Link to comment Share on other sites More sharing options...
Super Members BTM_Pix Posted June 27 Super Members Share Posted June 27 Considering he was using 180deg shutter angle it’s actually not that bad. Good thing about the gyro stabilisation like this in the BM and the Sony version cameras is that, unlike IBIS, it is non-destructive to the image so you can tweak it later. That’s not only good for the now but it also means if someone does come up with a better method then you can re-process the files and rescue or improve shots. With IBIS, those warps are there for good. bjohn, Ninpo33 and Emanuel 3 Quote Link to comment Share on other sites More sharing options...
bjohn Posted June 27 Share Posted June 27 Yes, for gyro to work properly you need to be at 90 or 45 degree shutter and then add back the motion blur in post (Resolve can do it well). Another advantage of the gyro is that it reduces rolling-shutter artificats. Main drawback is that there's a crop. If IBIS or gyro are not satisfactory, there's always steadicam, glidecam, or gimbal. I chose glidecam because I don't like having yet another device that requires batteries, and balancing on a glidecam is dead simple. But it's bigger/bulkier than a folding gimbal, and of course you can't adjust focus yourself since both hands need to be used on the glidecam; you'd need a wireless focus puller to work with you if you want to adjust focus. Not an issue for me as I only use wide lenses on the glidecam for maximum depth of field and try to maintain a constant distance from my subject. zlfan and Emanuel 2 Quote Link to comment Share on other sites More sharing options...
Emanuel Posted June 27 Share Posted June 27 haha That clinical eye of kye! ; ) Well, I think the question is more towards what we can identify as the usable/acceptable terms or not, isn't it? :- ) kye 1 Quote Link to comment Share on other sites More sharing options...
zlfan Posted June 27 Share Posted June 27 i still think a good ibis is a must if going small. the reason i like olympus is because the whole system can be very small, due to the fact that the body, the lens are small, and there is no need for tripod, monopod, or steadicam, etc. on the other hand, even om-1's ibis seems not smooth enough for walking? even so, as long as i can hold om-1 to have steady shots, smooth pans and tilts, i am happy. this is very good for travel, or stealthy news or events. bjohn 1 Quote Link to comment Share on other sites More sharing options...
bjohn Posted June 27 Share Posted June 27 20 minutes ago, zlfan said: on the other hand, even om-1's ibis seems not smooth enough for walking? Maybe it depends on how you walk; if you do the steadicam shuffle it's probably okay. I remember John Brawley used he EM1-Mark II on a bumpy snowmobile ride in one of his demo films for the camera and the footage came out quite smoothly. zlfan 1 Quote Link to comment Share on other sites More sharing options...
zlfan Posted June 27 Share Posted June 27 1 hour ago, bjohn said: Maybe it depends on how you walk; if you do the steadicam shuffle it's probably okay. I remember John Brawley used he EM1-Mark II on a bumpy snowmobile ride in one of his demo films for the camera and the footage came out quite smoothly. very nice short sci-fi. Quote Link to comment Share on other sites More sharing options...
Ninpo33 Posted June 28 Share Posted June 28 On 6/18/2024 at 6:03 AM, kye said: Skateboarders don't care about helmets, or safety of any kind whatsoever. See the below video, which they spiced up with slow-motion........ and explosives. Nice, I was there that day. The heat from the explosions singed my arm hairs. Always inspiring to be around Spike and Ty Evans and the fun shenanigans they get into. That was a good day of skating with my friends, thanks for posting. PannySVHS, John Matthews, kye and 1 other 3 1 Quote Link to comment Share on other sites More sharing options...
kye Posted June 28 Share Posted June 28 2 hours ago, Ninpo33 said: Nice, I was there that day. The heat from the explosions singed my arm hairs. Always inspiring to be around Spike and Ty Evans and the fun shenanigans they get into. That was a good day of skating with my friends, thanks for posting. Wow.. "I was there" wasn't a reply I expected! What else can you tell us about the shoot? Anything that looks that crazy on film has got to have some stories that go with it! John Matthews, PannySVHS and Ninpo33 3 Quote Link to comment Share on other sites More sharing options...
Ninpo33 Posted June 28 Share Posted June 28 8 hours ago, kye said: Wow.. "I was there" wasn't a reply I expected! What else can you tell us about the shoot? Anything that looks that crazy on film has got to have some stories that go with it! I grew up skating with all those guys in the 90’s and was around for a lot of the fun video shoots. Once Spike Jonze moved from skate videos to music videos and commercials, the production quality got crazy on the skate stuff. It was wild to watch us go from super 8/16 and good Mini DV video to Arri Cameras and the Phantom Flex. Plus full Hollywood production crews and amenities. the main thing on the “slow motion explosion day” was how the timing was hard to get for the explosions. You can see the scared reactions on a few of the guys as they land. A couple of them couldn’t hear for an hour or so after… kye, zlfan and ac6000cw 2 1 Quote Link to comment Share on other sites More sharing options...
IronFilm Posted June 29 Share Posted June 29 11 hours ago, Ninpo33 said: A couple of them couldn’t hear for an hour or so after… Why the heck didn't they wear earplugs??? Or was this even with earplugs??? :-o Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.